Can anyone tell me what all I need to put cruise control in my pickup?

 

An Actuator, Vacuum Switch, Vacuum Pump, throttle cable, throttle arm attachment, Cruise control ECU, Main Cruise Switch, Cruise Control Switch (you'll probably need a new steering wheel to mount those switches, and the slip ring to connect them back to the ECU), a main relay, a wiring harness, and a bunch of switches. http://web.archive.org/web/201102052...10cruiseco.pdf

Or, you could pick up one of these:
However you install it, you'll have to do some noodling and fabricating to attach everything to your vehicle, but people do it all the time. Let us know how it turns out!

 

Bringing this back......how is oem cable attached- are all years to the accelerator pedal? Any pics of this. I have the Rostra unit and was considering how to attach to TB but isn't looking too friendly. This 1990 is a 5 spd.

 

Factory installation, 1994 3VZE

 

22RE- some had a lever outfit in the cab at the accelerator pedal, maybe newer (1995) had a different affair?