Hey again y'all. I'm in the middle of doing an SR5 cluster swap on my '94 3VZE DLX (Automatic). I disassembled my DLX cluster and removed the odometer and swapped it into the SR5 gauge, but kept the SR5 face/needle. I ran 18 gauge wire to the P terminal on the new cluster and swapped in the correct oil sender. When I fire her up the tach works flawlessly, no CEL, and the oil pressure gauge is not fried. I took her for a spin and noticed that while the odometer is correctly metering the distance driven, the speedometer needle does not move at all. Does anyone know what might be wrong here? I put the odometer that came with the SR5 cluster into my DLX cluster and tried plugging that in and the speedo doesn't work on that either. I'm really stumped here!