Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

93 Auto 4runner 3.0l has power but wont crank

Thread Tools
 
Search this Thread
 
Old May 26, 2015 | 07:26 PM
  #1  
skidharmond's Avatar
Thread Starter
Registered User
 
Joined: May 2015
Posts: 4
Likes: 0
93 Auto 4runner 3.0l has power but wont crank

Hello,
I'm new to posting in the forum and would appreciate anybody's advice/help. 4runner was sitting for about a week, jumped in to start it and zero crank. Had power to everything as normal but no crank or clicks of the starter at all. Good starter on it, starter relay works correctly. Not sure what to check next. It seems like when I turn the key to the start position that power is being sucked away somewhere. The lights dont dim but the chime stops and the power antenna stops and the clock on the dash goes dark.
Any help is much appreciated.
Reply
Old May 27, 2015 | 09:50 AM
  #2  
thook's Avatar
Registered User
 
Joined: Sep 2005
Posts: 8,656
Likes: 16
From: NW Ark on wooded ten acres...Ozarks at large!
Try cleaning the battery connections, first.
Reply
Old May 27, 2015 | 09:55 AM
  #3  
millball's Avatar
Registered User
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Aug 2013
Posts: 4,262
Likes: 683
From: Southern Arizona
Charge the battery and then load test it.
Reply
Old May 28, 2015 | 08:02 PM
  #4  
skidharmond's Avatar
Thread Starter
Registered User
 
Joined: May 2015
Posts: 4
Likes: 0
Checked all the battery cables and everything is clean, no corrosion at all. Tried jump starting it with my pickup and no change at all. As soon as I turn the key to the "on" position, the door chime stops so power is at least cutting out a little there and then when I turn the key to "start" nothing happens at all, just the clock dims on the dash and thats it. Wondering if it could be the ignition switch?
Reply
Old May 30, 2015 | 06:57 PM
  #5  
skidharmond's Avatar
Thread Starter
Registered User
 
Joined: May 2015
Posts: 4
Likes: 0
So, put in a brand new battery, "polished" connections at terminals, also at the main ground and on the starter. Zero effect on the issue. Its the weirdest thing, I have never had any issues starting it at all and then one day just absolutely nothing, no clicks or anything. I know the connection is clipped on correctly from the ignition to the starter. Im still thinking maybe the ignition switch? but would it just go out without giving me any issues first? Could this have anything to do with the alarm system? if the battery in the alarm fab went dead would this have an effect? Thanks for any ideas.....
Reply
Old Jun 1, 2015 | 07:24 PM
  #6  
skidharmond's Avatar
Thread Starter
Registered User
 
Joined: May 2015
Posts: 4
Likes: 0
Anybody have any other ideas? I can't for the life of me come up with what the problem is. Any help or ideas is more than welcome...
Reply
Old Jun 3, 2015 | 10:12 PM
  #7  
thook's Avatar
Registered User
 
Joined: Sep 2005
Posts: 8,656
Likes: 16
From: NW Ark on wooded ten acres...Ozarks at large!
Alarm system? Yes, it could. I mean, I've had that problem before....twice....with my wife's wagon. The last time, I'd forgotten there was even an alarm system. Thought I'd disabled it entirely a long time ago....after the first incident. The switch is right under the steering column on the lower trim of the dash. Accidentally kick the switch and no power to the ignition.

So, worth looking into, for sure.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
God's Bounty Hunter
Pre 84 Trucks
6
Jul 8, 2015 12:54 PM
toyota32
86-95 Trucks & 4Runners
6
Jul 6, 2015 05:42 PM
Jnkml
95.5-2004 Tacomas & 96-2002 4Runners
3
Jul 6, 2015 01:20 PM
CJ94yota
86-95 Trucks & 4Runners (Build-Up Section)
2
Jul 3, 2015 10:14 PM




All times are GMT -8. The time now is 04:38 AM.