I am completing an engine/cab swap on my 1984 frame. I just put in an 88 RE into an 88 RE cab with the full 88 RE harness that is the original harness that came with the 88 cab and engine.

I have three wires that are missing thier pigtail/connection. Two of the wire(red w/stripe and red wire) are supposed to be installed into the same pigtail. I only know that because the rubber grommet that seals the plug/pigtail is still attached.

I suspect they are the tranfer case and reverse light but I want some reasurrance. For what ever reason I cant find any legit pics or answers to this seemingly easy to solve issue. I searched google images and the yota forums form days with no luck.

 

There is a big white plug that is kind of an odd shape. I am sure one of the connectors goes there. I can get pictures later on this evening if all goes well.

 

Thank you "terrys87",

is the white plug designated for the transfer or the reverse? I also have to

Man, I would appreciate that picture. The pic is all I need to verify and I can go find a plug somewhere (hopefully not the dealer).

 

The green wire on one end of the single plug connects on the other end of the plug to a red wire with a yellow stripe. It looks yellow from what I can see. (The green wire is on top and on the right side of the plug in the below picture)

The big white plug coneects to two red wires and I can see the colors on them as I have some overspray on them. Maybe the picture will show it better.


This one is near the transfer case.

 

Terry,

Thanks for the fast pics. it is a big help. Are the two red wires coming from the harness or the sensor? (in the top picture). What year is the harness that you are taking pics of?