I have a 94 pickup with a plow on it. The front end sags with the plow lifted and I'm thinking air socks on the front would be perfect.

1...Is this possible?

2...If so, which ones should I use?

3...where do I get them?

Thank You....

Mark

 

Its possible. I havnt found any that fit yet. 99% of them are rear app so the short ones are rare. Best bet is be good freinds with your parts guy and see if you can measure what they have in stock compared to factory

 

Hi INU

Thanks for the info. I was really hopeing for a magic bullet, but this is pretty much what i figured.
I guess it's time to get out the tape measure and head for NAPA.

Thanks...
Mark

 

Have you TRIED adjusting the torsion bars to compensate?? That would be the LOGICAL solution.

 

Would work but sucks adjusting them everytime you remove the blade.