2000 4runner - camshaft position sensor resistance?
Dec 11, 2012 | 03:43 PM
#1
Thread Starter
Registered User
Joined: Dec 2006
Posts: 40
Likes: 0
2000 4runner - camshaft position sensor resistance?
When checking the resistance on this sensor, would a reading of 1.104 indicate a faulty sensor, or is my meter display simply showing me 1104? I adjust the fluke to show me a reading in k ohms, and it reads 1.104. The FSM says it should read between 835 - 1400 k ohms, cold. This engine is cold, havent started it for days. Meter says 1.104 - is that a bad sensor?
how often do these actually go bad and how often do they cause misfires? ( I recently replaced the TB/WP and reverified the timing marks line up, on every second rotation of the crank pully.)
how often do these actually go bad and how often do they cause misfires? ( I recently replaced the TB/WP and reverified the timing marks line up, on every second rotation of the crank pully.)
Last edited by 43jeeper; Dec 12, 2012 at 08:40 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Avenged
95.5-2004 Tacomas & 96-2002 4Runners
4
Jul 9, 2015 07:55 AM
Jnkml
95.5-2004 Tacomas & 96-2002 4Runners
3
Jul 6, 2015 01:20 PM
