Newbie Tech Section Often asked technical questions can be asked here
Sponsored by:
Sponsored by: CARiD

3rd gen 4runner 3" body lift

Thread Tools
 
Search this Thread
 
Old May 26, 2012 | 01:57 PM
  #1  
97_T4R's Avatar
Thread Starter
Registered User
 
Joined: May 2012
Posts: 3
Likes: 0
From: Mckinney, texas
3rd gen 4runner #5 misfire

Hey guys,
I've been having a problem with my cylinder 5 misfiring and ive replaced the spark plug, the wires, and the coil pack. My MAF recently went out and I assumed that was the cause so I replaced that to, $220 down the drain :/ and I was still having the same problem. Is there something else that could be causing cylinder #5 to misfire?

Last edited by 97_T4R; May 26, 2012 at 02:53 PM.
Reply
Old May 28, 2012 | 06:44 PM
  #2  
97_T4R's Avatar
Thread Starter
Registered User
 
Joined: May 2012
Posts: 3
Likes: 0
From: Mckinney, texas
Well after no responses, I just started tinkering around on the motor and it turns out the misfire was due to a clogged fuel injector. So I put 12V of power to it to get the valve thing inside to open up and then sprayed some rubbing alcohol in it and blew really hard through it and watched all the gunk fly out. Now runs like champ
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
Jun 1, 2021 01:51 PM
Avenged
95.5-2004 Tacomas & 96-2002 4Runners
4
Jul 9, 2015 07:55 AM
God's Bounty Hunter
Pre 84 Trucks
6
Jul 8, 2015 12:54 PM
Vargntucson
95.5-2004 Tacomas & 96-2002 4Runners
0
Jul 4, 2015 12:15 PM
CJ94yota
86-95 Trucks & 4Runners (Build-Up Section)
2
Jul 3, 2015 10:14 PM




All times are GMT -8. The time now is 02:39 AM.