Anyone know where I could get the wiring harness that runs from the computer to the fuel pump on a 1991 Toyota Pickup 4x4 Standard Cab? Mine has been butchered by the previous owner, and I'm having no luck finding a used one and don't really want to go to the stealership. Thanks in advance!

 

Let me get home, and I can scan it in and email it to you.

 

I am not sure if you misunderstood me and are going to scan a wiring diagram and send it to me(which would be nice), or if that was a sorry attempt at being condescending. Either way, I also live near Knoxville, in Clinton, and some help would be greatly appreciated.

 

I have a whole book from when I did my 3.4 swap on the wiring diagrams for a '91 4Runner. should still be the same as the truck electrically.

 

http://www.ncttora.com/fsm/index.html

do you still have good connectors/plugs? you could just 'rebuild' them with fresh wire maybe? DelCity has awesome deals and good products for wire and just about any electronic/wiring stuff ($99 min order though)

 

I am not sure if even the dealer could still get one the one for my 87 is no longer available.

If you can`t find a used one making your own or repairing your own is your only option.

Just how bad is it??

Solder and heat shrink tubing are your est bet.

Good luck.

 

Found a used one, but it's for an extra cab V-6. Mine is a standard cab 22RE. Anyone know if they would be the same? I'm sure the extra cab will be a little longer, but would everything else be the same? It's shorted out somewhere and after seeing how they have cut, taped, and used cheap connectors on just about everything to doctor it up, I figured I could come out better just replacing it. Looks kinda like a fire hazard in its current state. lol

 

Bump. Anyone know if one off a 3.0L will work on my 22RE? I'd like to get it before someone else does, but don't want to buy the wrong part. Thanks again!

 

Anyone?? I need my truck running! lol