Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

3vze drive belts - part numbers and where to buy?

Thread Tools
 
Search this Thread
 
Old Feb 4, 2012 | 01:01 PM
  #1  
Lurker's Avatar
Thread Starter
Registered User
 
Joined: Jan 2012
Posts: 6
Likes: 0
From: Western SoDak
Question 3vze drive belts - part numbers and where to buy?

Hello,

I searched around for a while and consulted the manual I have, but wasn't able to come up with anything. Does anyone happen to have the Toyota part numbers for the fan/PS belt, alternator belt, and A/C belt on hand? This is for a 1995 4Runner with a 3VZE.

Also, can Toyota-brand belts be purchased online? The local Toyota dealership is farther away than what I want to drive. If not, is there a particular "aftermarket" belt manufacturer (AC Delco, Goodyear, etc.) whom you would recommend as a substitute for OEM belts?

Thanks a lot! I appreciate it.
Reply
Old Feb 4, 2012 | 01:28 PM
  #2  
MudHippy's Avatar
Registered User
 
Joined: Jan 2007
Posts: 6,106
Likes: 27
V BELT (FOR FAN & ALTERNATOR) 90916-02378-83
V BELT (FOR POWER STEERING VANE PUMP) 90916-02196-83
V BELT (FOR A/C COMPRESSOR TO CRANKSHAFT PULLEY NO.1) 99332-10890-78

For OEM I always buy from 1stToyotaParts.com. But there are many such OEM parts suppliers.

I don't happen to prefer any brand of belts over another. I just go to NAPA (or whichever Auto Parts store is available)and buy what they have in stock. I've never had any bad experiences with any brand of belt in 20+ years of driving. IOW, belts are all the same in my book.

Last edited by MudHippy; Feb 4, 2012 at 01:29 PM.
Reply
Old Feb 5, 2012 | 07:48 AM
  #3  
Lurker's Avatar
Thread Starter
Registered User
 
Joined: Jan 2012
Posts: 6
Likes: 0
From: Western SoDak
Thank you, MudHippy. Looks like I was incorrect about the power steering and fan sharing the same belt, it's the fan and alternator... not sure why I had it stuck in my head wrong.
Reply
Old Nov 21, 2012 | 02:18 PM
  #4  
XxX_4_play_offroad's Avatar
Registered User
 
Joined: Oct 2012
Posts: 9
Likes: 0
From: lathrop,ca
couldnt really find any other posts for drive belts so here it is- i bought a 92 yota sr5 4wd 5 speed no a/c and just did the timing belt, water pump thermostat yada yada yada. when putting the power steering belt back on i noticed that no matter how much i pry on the slide bar i cant get the belt tight enough even when loosening both the pivot bolt and slide bolt ??????? but before i started to tear everything down the belt was plenty tight any help would be greatly appreciated
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
94 Newbie
95.5-2004 Tacomas & 96-2002 4Runners
2
Jul 6, 2015 04:23 AM
bprice0077
86-95 Trucks & 4Runners
2
Jun 25, 2015 07:36 AM
Chooch
86-95 Trucks & 4Runners
9
Jun 19, 2015 03:05 PM
TheManOutside
95.5-2004 Tacomas & 96-2002 4Runners
0
Jun 18, 2015 03:32 PM
LSUMatt1514
95.5-2004 Tacomas & 96-2002 4Runners
3
Jun 26, 2002 05:03 AM




All times are GMT -8. The time now is 08:26 AM.