Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

fuel filter replacement... relieving fuel

Thread Tools
 
Search this Thread
 
Old Aug 29, 2011 | 06:45 PM
  #1  
thisgsx's Avatar
Thread Starter
Registered User
 
Joined: Apr 2010
Posts: 72
Likes: 0
fuel filter replacement... relieving fuel

the fuel filter looks like an easy job, i've disconnected the fuel pump, took out the efi 15AMP fuse, cranked up the motor, and yet, there is still fuel dripping out of the fuel line when I loosened one end of the fuel line. One thing to note, when i cranked up the motor, shouldn't it be running until it's used up whatever fuel's left and then it should die? when i disconnected the fuel pump harness and took out the fuse, the motor cranks, but won't turn over. let me know if im doing this correct as i don't want to waste a lot fuel doing this job. thanks!
Reply
Old Aug 29, 2011 | 07:12 PM
  #2  
874runnersr5's Avatar
Registered User
 
Joined: May 2008
Posts: 3,948
Likes: 11
From: Calgary, AB Canaduh
your going to have some fuel drain out, not a big deal
Reply
Old Aug 29, 2011 | 07:31 PM
  #3  
thisgsx's Avatar
Thread Starter
Registered User
 
Joined: Apr 2010
Posts: 72
Likes: 0
yes, but the steps i took, is that correct?
Reply
Old Aug 29, 2011 | 07:45 PM
  #4  
85gijunk4x4's Avatar
Registered User
 
Joined: May 2010
Posts: 3,120
Likes: 1
From: piney hicks nj
i just pulled in the garage, waited for the engine to cool down, and then i pulled the ful lines off. i just propped the lines UPWARD resting agains the intake manifold so that way fuel wasnt constantly dripping out...

but in reality, no matter what you do, or how you do it, fuel still will drip out. its no biggie
Reply
Old Aug 29, 2011 | 07:46 PM
  #5  
thisgsx's Avatar
Thread Starter
Registered User
 
Joined: Apr 2010
Posts: 72
Likes: 0
cool.
Reply
Old Aug 30, 2011 | 03:52 AM
  #6  
GuitarMike's Avatar
Registered User
 
Joined: Aug 2011
Posts: 259
Likes: 0
From: Maine
Originally Posted by thisgsx
yes, but the steps i took, is that correct?
Yeah....manual says it should run itself dry, but it's the PRESSURE RELIEF process you're interested in, not burning the fuel up. So you're going to get some fuel drip - you're trying to avoid a pressure washer effect when you pull the line!

I'd be inclined to crank it a little more than 1x, myself. But I doubt it's much more than a soda bottle worth of pressure (?).
Make sure that exhaust is cold! Be safe.
Reply
Old Aug 31, 2011 | 01:51 PM
  #7  
scope103's Avatar
Registered User
15 Year Member
 
Joined: Sep 2007
Posts: 8,381
Likes: 873
From: San Francisco East Bay
REMOVE THE FUEL FILLER CAP.

On a warm day, enough pressure can build up in the tank from vapors to almost empty the tank when you pull the filter.

Don't worry about pulling the EFI fuse to stall out the engine. At best, you'll reduce the pressure in the line from 55psi to, oh, 40psi. But the pressurized volume of the line is small, and you won't lose an excessive amount of fuel from that.

As stated you will lose some fuel, so think ahead. Get a container to catch it. Wear Nitrile, not latex, gloves. Leave the garage door open for air, no matter how cold it is. And don't use that nice drop light; if you bump it and break the bulb, we'll never even hear about it.
Reply
Old Aug 31, 2011 | 02:51 PM
  #8  
BMcEL's Avatar
Registered User
 
Joined: Aug 2010
Posts: 2,027
Likes: 0
From: Oregon, USA
I wouldn't do this indoors period...door(s) open or not. Fuel vapors be dangerous mang.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
smthwsn357
86-95 Trucks & 4Runners
15
May 1, 2024 07:28 AM
Eggslinger
86-95 Trucks & 4Runners
22
Jun 8, 2019 03:32 PM
pyramid
86-95 Trucks & 4Runners
10
Jul 30, 2015 10:05 AM
ddg71
86-95 Trucks & 4Runners
1
Jul 24, 2015 01:24 PM
Fundy Rider
86-95 Trucks & 4Runners
4
Jul 16, 2015 01:35 AM




All times are GMT -8. The time now is 02:36 PM.