I bought a set of used Blazeland arms. Anyone tell me what the ride height is supposed to be set at?

I have it set to 4" of sag (frame height) vs jacked up with the wheels just barely touching the ground. I figure about 1/2" of that is the tire flattening with the weight.

Thanks!
Eric

 

You should be shooting for about 3" of lift over stock. If you have the factory rubber droop stops you should have about 3/4" to 1" space between the stop and the UCA. E-mail me at blazelandn8@yahoo.com or call me. The phone number is on the Blazeland website.

 

Thank you, N8!