Pre 84 Trucks (Build-Up Section) Post your build-ups here

RustyToy's $100 83 4x4 longbed Rebuild Thread

Thread Tools
 
Search this Thread
 
Old Jan 4, 2011 | 08:28 AM
  #1  
RustyToy's Avatar
Thread Starter
Registered User
 
Joined: Jan 2011
Posts: 27
Likes: 0
From: johns creek, GA
RustyToy's $100 83 4x4 longbed Rebuild Thread

last year at my family christmas i finally asked my uncle about that toyota that has been sitting in his yard since 02. he said it doesnt run and he would sell it to me for $100 so i rented a tow dolly and picked it up. it had two flats and i only had one spare. so i put the spare in the rear and left the flat in the front on the dolly. well halfway home the trailer started swaying violently over 40mph so i pulled over and one strap was completely off and the other was barely holding on to the flat tire. It was a close call but i finally arrived home
Attached Thumbnails RustyToy's 0 83 4x4 longbed Rebuild Thread-img_0569-small-.jpg  
Reply
Old Jan 4, 2011 | 08:30 AM
  #2  
little_93_pickup's Avatar
Registered User
 
Joined: Oct 2010
Posts: 91
Likes: 0
From: Wayne, NJ
nice find
Reply
Old Jan 4, 2011 | 08:36 AM
  #3  
mightymouse's Avatar
Registered User
iTrader: (6)
 
Joined: Apr 2009
Posts: 1,756
Likes: 12
From: high ridge
and then.......
Reply
Old Jan 4, 2011 | 08:36 AM
  #4  
xxxtreme22r's Avatar
Registered User
 
Joined: Aug 2009
Posts: 13,574
Likes: 72
From: Wilkes-Barre, PA, USA
now why can I not find deals like that?
Reply
Old Jan 4, 2011 | 08:53 AM
  #5  
RustyToy's Avatar
Thread Starter
Registered User
 
Joined: Jan 2011
Posts: 27
Likes: 0
From: johns creek, GA
after taking the truck apart i found mud everywhere.
Attached Thumbnails RustyToy's 0 83 4x4 longbed Rebuild Thread-img_0584-small-.jpg   RustyToy's 0 83 4x4 longbed Rebuild Thread-img_0597-small-.jpg  
Reply
Old Jan 4, 2011 | 09:03 AM
  #6  
RustyToy's Avatar
Thread Starter
Registered User
 
Joined: Jan 2011
Posts: 27
Likes: 0
From: johns creek, GA
other than bed rust this was my only problem. from the bottom right corner of the window seal leak. anybody have pics of fixing this?
Attached Thumbnails RustyToy's 0 83 4x4 longbed Rebuild Thread-img_0588-small-.jpg  
Reply
Old Jan 4, 2011 | 09:13 AM
  #7  
dropzone's Avatar
Fossilized
iTrader: (6)
 
Joined: Oct 2005
Posts: 19,771
Likes: 456
From: PNW
Pretty common issue with regard to the floor rust, my had it three out of the 4 cab corners.

chip out the sound deadening material (it likes to catch fire), grind out the rust so you have a clean area to weld to and cut a patch panel to weld in the there
Reply
Old Jan 4, 2011 | 09:52 AM
  #8  
Swimmerboy2112's Avatar
Registered User
iTrader: (2)
 
Joined: Apr 2010
Posts: 4,835
Likes: 3
From: Walnutport, PA
Originally Posted by xxxtreme22r
now why can I not find deals like that?
x2 man...
Reply
Old Jan 4, 2011 | 12:07 PM
  #9  
little_93_pickup's Avatar
Registered User
 
Joined: Oct 2010
Posts: 91
Likes: 0
From: Wayne, NJ
Originally Posted by Swimmerboy2112
x2 man...
x3. wish i could find something like this.
Reply
Old Jan 4, 2011 | 12:49 PM
  #10  
cztheman64's Avatar
Registered User
 
Joined: May 2008
Posts: 97
Likes: 0
From: Kennesaw, GA
he wouldnt happen to have another truck in his yard does he? im callin first dibs
Reply
Old Jan 6, 2011 | 08:28 AM
  #11  
RustyToy's Avatar
Thread Starter
Registered User
 
Joined: Jan 2011
Posts: 27
Likes: 0
From: johns creek, GA
most comfortable truck bed ever!
Attached Thumbnails RustyToy's 0 83 4x4 longbed Rebuild Thread-img_0582-small-.jpg  
Reply
Old Jan 6, 2011 | 08:33 AM
  #12  
RustyToy's Avatar
Thread Starter
Registered User
 
Joined: Jan 2011
Posts: 27
Likes: 0
From: johns creek, GA
the truck had a 2wd oil pan on it and i think someone had jumped the truck because it had an imprint of the axle housing in it. so i took it off and the oil pickup was bent and i found pieces of plastic from the timing chain guide in the pan.
Attached Thumbnails RustyToy's 0 83 4x4 longbed Rebuild Thread-img_0611-small-.jpg  
Reply
Old Jan 6, 2011 | 08:39 AM
  #13  
RustyToy's Avatar
Thread Starter
Registered User
 
Joined: Jan 2011
Posts: 27
Likes: 0
From: johns creek, GA
so i used my forklift at work to remove the engine and found a mechanic who already had a rebuilt motor and used my broken one as a core charge and had him put the new one in.
Attached Thumbnails RustyToy's 0 83 4x4 longbed Rebuild Thread-img_0658-small-.jpg  
Reply
Old Jan 15, 2011 | 05:05 AM
  #14  
DrifterTim's Avatar
Registered User
 
Joined: Jul 2008
Posts: 16
Likes: 0
From: Montreal Canada
love the mattress bed lol but if it snows or rains its a cold wet bed
Reply
Old Feb 1, 2011 | 08:36 AM
  #15  
RustyToy's Avatar
Thread Starter
Registered User
 
Joined: Jan 2011
Posts: 27
Likes: 0
From: johns creek, GA
new engine with my new Weber 32/36 carb.
Attached Thumbnails RustyToy's 0 83 4x4 longbed Rebuild Thread-img_0668-small-custom-custom-.jpg  
Reply
Old Feb 1, 2011 | 07:29 PM
  #16  
redsyota's Avatar
Registered User
 
Joined: Feb 2010
Posts: 27
Likes: 1
From: Pittsburg Kansas
great build, keep the updates and pics coming!!
Reply
Old Feb 3, 2011 | 08:54 AM
  #17  
RustyToy's Avatar
Thread Starter
Registered User
 
Joined: Jan 2011
Posts: 27
Likes: 0
From: johns creek, GA
finished my two coats of primer on the body.now started spraying the frame and suspension.
Attached Thumbnails RustyToy's 0 83 4x4 longbed Rebuild Thread-framepaint-small-.jpg  
Reply
Old Feb 3, 2011 | 08:55 AM
  #18  
RustyToy's Avatar
Thread Starter
Registered User
 
Joined: Jan 2011
Posts: 27
Likes: 0
From: johns creek, GA
started putting my coats of flat black on the truck. sorry blurry picture.
Attached Thumbnails RustyToy's 0 83 4x4 longbed Rebuild Thread-paintblack-small-.jpg  
Reply
Old Feb 3, 2011 | 09:06 AM
  #19  
RustyToy's Avatar
Thread Starter
Registered User
 
Joined: Jan 2011
Posts: 27
Likes: 0
From: johns creek, GA
i used the electrolysis method to clean my gas tank. then i sealed it with a quart of POR-15. and painted the outside with the undercarriage spray.
Attached Thumbnails RustyToy's 0 83 4x4 longbed Rebuild Thread-gas-tank-small-.jpg  
Reply
Old Feb 3, 2011 | 09:11 AM
  #20  
RustyToy's Avatar
Thread Starter
Registered User
 
Joined: Jan 2011
Posts: 27
Likes: 0
From: johns creek, GA
my 3" skyjacker lift and shocks came in and i also found a good deal on a set of used 17" rims off craigslist!
Attached Thumbnails RustyToy's 0 83 4x4 longbed Rebuild Thread-rims-small-.jpg  
Reply



All times are GMT -8. The time now is 02:58 PM.