Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

need help cranks put wont start !!

Thread Tools
 
Search this Thread
 
Old Aug 21, 2010 | 01:26 AM
  #1  
ej1bullet's Avatar
Thread Starter
Registered User
 
Joined: Jul 2010
Posts: 96
Likes: 0
From: san jose ca
need help cranks put wont start !!

hay guys i own a 94 4 runner sr5 v6 my truck totally gave up on me my engine cranks it has spark also fuel . i cheek my cheek engine light and it keeps blinking like crazy it wont stop i cant think of any thing that can be i cheek my efi fuss my Maine circuit relay and also my Maine relay i also replace the spark plugs,spark plug weirs,cap and rotter and also fuel pump

any ideas guy who'd help !
Reply
Old Aug 21, 2010 | 01:20 PM
  #2  
MudHippy's Avatar
Registered User
 
Joined: Jan 2007
Posts: 6,106
Likes: 27
O.k., first off, the check engine light constantly blinking means you have no diagnostic trouble codes present. That's good, that eliminates alot of possibilities.(Of course, I'm assuming you've jumped the check connectors to make that happen.)

Next, did you remove the distributor from the engine at some point during all these repairs?

Because a common mistake is to install the distributor 180 degrees off. That would cause exactly the symptoms you've described.

Last edited by MudHippy; Aug 21, 2010 at 01:37 PM.
Reply
Old Aug 21, 2010 | 02:59 PM
  #3  
sb5walker's Avatar
Registered User
 
Joined: Jan 2008
Posts: 1,085
Likes: 7
From: Connecticut
If the distrib is ok check that your injectors are firing. Easiest way is to listen with a mechanics stethoscope (hold the rod against an injector) while someone cranks it. If they're firing the clicks will be loud and clear. Check that +B in the check connector is hot when ignition is on. If not, check the IGN fuse in drivers kick.
Reply
Old Aug 22, 2010 | 11:08 AM
  #4  
ej1bullet's Avatar
Thread Starter
Registered User
 
Joined: Jul 2010
Posts: 96
Likes: 0
From: san jose ca
Originally Posted by MudHippy
O.k., first off, the check engine light constantly blinking means you have no diagnostic trouble codes present. That's good, that eliminates alot of possibilities.(Of course, I'm assuming you've jumped the check connectors to make that happen.)

Next, did you remove the distributor from the engine at some point during all these repairs?

Because a common mistake is to install the distributor 180 degrees off. That would cause exactly the symptoms you've described.


thanks man that is exactly what happen... lol so i rotated the pulley until it was on tdc than i took off my distributor cap , than i saw my rotter way off so i started to take the timing cover off the timing brlt whan i notice a cuple of nicks on my yiming belt so i replace and started right up thanks guys for your help!!:bow down2:
Reply
Old Aug 23, 2010 | 05:08 PM
  #5  
MudHippy's Avatar
Registered User
 
Joined: Jan 2007
Posts: 6,106
Likes: 27
You bet! Glad to help!
Reply
Old Aug 23, 2010 | 05:53 PM
  #6  
goodscoolxh's Avatar
Registered User
 
Joined: Aug 2010
Posts: 1
Likes: 0
I would like to say that my brother is familiar with the truck , i will ask him about this , then i will tell you what should you do .
Reply
Old Aug 23, 2010 | 07:02 PM
  #7  
MudHippy's Avatar
Registered User
 
Joined: Jan 2007
Posts: 6,106
Likes: 27
A little late for that there newbs! The problem is long solved by now.

That's alright...we all get a little over-excited sometimes. Don't feel bad.

Last edited by MudHippy; Aug 23, 2010 at 07:24 PM.
Reply
Old Aug 23, 2010 | 08:08 PM
  #8  
Lawmaker's Avatar
Registered User
 
Joined: Aug 2010
Posts: 19
Likes: 0
I have a similar problem. It seems as though I am not getting gas when starting. If I press the gas pedal a little bit it will start right up.

88 22RE
Reply
Old Aug 30, 2010 | 11:11 AM
  #9  
ej1bullet's Avatar
Thread Starter
Registered User
 
Joined: Jul 2010
Posts: 96
Likes: 0
From: san jose ca
Originally Posted by Lawmaker
I have a similar problem. It seems as though I am not getting gas when starting. If I press the gas pedal a little bit it will start right up.

88 22RE
you might want to check your idle thanks for helping by the way!!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Ichneumon
86-95 Trucks & 4Runners
6
Sep 27, 2015 04:21 PM
torgeir
Newbie Tech Section
0
Jun 25, 2015 05:26 AM
slider417
86-95 Trucks & 4Runners
1
Jun 22, 2015 10:18 AM
turboale
95.5-2004 Tacomas & 96-2002 4Runners
7
Jul 2, 2002 01:30 PM
94 First Responder
95.5-2004 Tacomas & 96-2002 4Runners
4
Jun 6, 2002 02:19 PM




All times are GMT -8. The time now is 08:15 PM.