let me start of with the fact that im clearly a novice and i greatly appreciate any help i get!

anyhow, ive been having a leaking issue with my brakes. the fluid reservoir will drain after about 2 weeks. i believe the culprit is this part as ive followed the brake lines and see no evidence of a leak except around this part. part of the problem is i have no clue what this part is called even after reading everything about brakes in the haynes manual.


thanks in advance for the help!

 

LSPV

Load Sensing Proportioning Valve

http://www.ncttora.com/fsm/1990-1995...r/loadsens.pdf

 

That`s the load sensing proportioning valve. Try finding a good used one, as a new one can be a bit expensive.

 

LPSV = Load Proportioning sensing Valve. It put's more braking power on the rear brakes when there is a heavy load in the truck. When you replace that part, which I would do, make sure you bleed that part LAST. Your brakes will never be right if you do it in some other order.

 

Damm you guys type fast....

 

thanks guys! much appreciated!