driveshaft rebuild??
Jan 28, 2010 | 07:45 AM
#1
Thread Starter
Registered User
Joined: Aug 2007
Posts: 5,334
Likes: 4
From: Vian, OK
driveshaft rebuild??
is it possible to rebuild the driveshaft of my '80 pickup..it's getting sold saturday (kinda last minute thing) and the driveline shop ya can't...but i bought the part to do it so obviously you can
it's the joint in the Double Cardan (spelling?) part..like the center joint?
it's the joint in the Double Cardan (spelling?) part..like the center joint?
Jan 28, 2010 | 08:01 AM
#2
Registered User
Joined: Oct 2009
Posts: 272
Likes: 0
From: Natchitoches, La
it can be changed out, but keep in mind when you finally get it apart there are little needle bearings in the back half, not the ones in the u-joint, will come out and make hell to go back together, and make sure you grease it.
Jan 28, 2010 | 10:11 AM
#4
Jan 28, 2010 | 10:17 AM
#5
Thread Starter
Registered User
Joined: Aug 2007
Posts: 5,334
Likes: 4
From: Vian, OK
THANKS 4crawler!
now where are these needle bearings you are speaking of that are a B#$@$ to deal with toyotabull?
are you talking about the needle bearings in the center piece of this pic http://www.4x4wire.com/toyota/tech/cvmod/DSC01962.jpg
now where are these needle bearings you are speaking of that are a B#$@$ to deal with toyotabull?
are you talking about the needle bearings in the center piece of this pic http://www.4x4wire.com/toyota/tech/cvmod/DSC01962.jpg
Thread
Thread Starter
Forum
Replies
Last Post
justdifferentials
Just Differentials
5
Jun 13, 2022 07:40 PM
FS[NorAtl]: Parting 93 3.0 Exta-cab 4x4,auto
ToyotaMD
Vehicles - Parting Out
32
Aug 17, 2018 10:16 PM
1985, 4runner, area, bay, cardan, double, drive, drivelines, driveshaft, driveshafts, rebuild, rebuilding, rebuilt, shaft, toyota
