I'm in the process of replacing my motor, and although there's nothing wrong with my current clutch, I wanna go ahead and replace it since I don't know long it's been in there, what clutch it is. My question is, which clutch should I go with for a DD with 31s? I was looking at the MC 1,200lb and WabFab's standard clutch, not sure of which one though.

BTW, I did search before I posted this.

 

I got a ceramic and a standard, and I much prefer the standard. No reason to go to ceramic on a dd'er with 31s IMO.

 

Ya, I know I don't need a ceramic clutch, just thought the 1200lb metallic one from MC might be better for the 31s when I go play in the mud, or have to pull someone out of it. But if the standard will be fine, I'll probably be ordering one from you.

 

I have a standard on my trail rig currently with 37" Iroks, dual cases, etc but then a ceramic on my dd with 35s. My old knees much prefer the standard to the ceramic, especially on the daily driver. I will be removing the ceramic one next time the tranny comes off for any reason. (PO put the ceramic on there not me).

 

Just replace with a regular OEM style clutch. That's what I did, I have 30's but I run my truck pretty hard, probably gonna go up to 31's or 32/10.50's sometime soon still undecided.

I know a guy who desert races and he recommends just using OEM style clutches.

 

I'm a fan of the OEM Toyota if I can afford it. When I replaced mine I went with Wabbit's cuz I had major shipping delays from Marlin but the whole time my buddy was telling me to go to advance and get a LUK.