Hi all,

For the 89-95 Pickup, the tub has bolt holes in all 4 corners (originally for the factory rollbar etc.) and I remember seeing a thread somewhere about getting metal tie-down hooks / loops / saddles that match the hole spacing.

Does anyone know what the Toyota part # was please? or where they were sourced?

I did have a look at my local marine supplier for s/s saddles, but none were the right size.

This is sort of what they would look like...
.

Thanks

 

Can't help you much with the part number but my 91 has mount points for 6 tie-down hoops. They are rectangular-ish with 4 up front, two each side, and 2 in the rear, one each side.
You might hit up DeathCougar here and see what he can offer.

 

my stock bed on my 91 has 2 loop style tie downs (like the ones in the second picture you have) in each corner I thought those were standard, and just came with the bed

 

#20 Tie down hook says there $7.24 ea

 

might be cheaper to just make some with scrap metal and like those things on the 2nd pic

 

my 87 has square tie-down loops in each corner.
i use them, they're really strong...

 

Ok I've ordered a few parts to see what fits, so I'll post some pics when they arrive....

At the dealer, we looked at the picture of the #20 hook, but it's strange because the picture suggests the hook mounts horizontally, even through the bolt holes are on the side of the tub.

I also ordered a hook from a newer model pickup, hoping that the spacing is the same.

 

I'll see if I can get Sin91 to take a pic of the hoops in her truck then I'll post them up. But I don't expect to have the pic for another 30 minutes or so.

 

Sorry for the poor lighting but...