95.5-2004 Tacomas & 96-2002 4Runners 4th gen pickups and 3rd gen 4Runners

Where to purchase New Dynamic Tensioner

Thread Tools
 
Search this Thread
 
Old Nov 9, 2009 | 05:33 PM
  #1  
xcmountain80's Avatar
Thread Starter
Registered User
 
Joined: Jul 2004
Posts: 1,921
Likes: 0
From: Jupiter, FL
Where to purchase New Dynamic Tensioner

Well I purchased a TRD SC, and knew I would need a new tensioner (although all the parts are here from the old one, perhaps a rebuild is in order) where do I find one for around $100?

A
Reply
Old Nov 9, 2009 | 05:37 PM
  #2  
xcmountain80's Avatar
Thread Starter
Registered User
 
Joined: Jul 2004
Posts: 1,921
Likes: 0
From: Jupiter, FL
Found the pulley for $99 from URD, I'll have to check and see if I can just replace it.

A
Reply
Old Nov 9, 2009 | 05:56 PM
  #3  
xcmountain80's Avatar
Thread Starter
Registered User
 
Joined: Jul 2004
Posts: 1,921
Likes: 0
From: Jupiter, FL
Yep tensioner is fine just in need of sweet ano red pulley. I will add that to my list on URD stuff

A
Reply
Old Nov 13, 2009 | 08:21 AM
  #4  
Bennito's Avatar
Contributing Member
 
Joined: Aug 2003
Posts: 849
Likes: 0
From: Tempe, AZ
Good find. HOpefully you have new hardware for the tensioner. Gadget confirmed that I am not the only person to shear the bolts holding the tensioner in place.
Reply
Old Nov 14, 2009 | 06:03 AM
  #5  
xcmountain80's Avatar
Thread Starter
Registered User
 
Joined: Jul 2004
Posts: 1,921
Likes: 0
From: Jupiter, FL
Originally Posted by Bennito
Good find. HOpefully you have new hardware for the tensioner. Gadget confirmed that I am not the only person to shear the bolts holding the tensioner in place.
New hardware wasn't needed as I inspected the old, but a replacement wouldn't be a bad idea.

A
Reply
Old Nov 14, 2009 | 06:54 AM
  #6  
mt_goat's Avatar
Contributing Member
 
Joined: Nov 2002
Posts: 10,666
Likes: 5
From: Oklahoma State
Originally Posted by Bennito
Good find. HOpefully you have new hardware for the tensioner. Gadget confirmed that I am not the only person to shear the bolts holding the tensioner in place.
Yeah I've been using anti-seize on mine after seing all the problems peeps have had.
Reply
Old Nov 14, 2009 | 07:02 AM
  #7  
xcmountain80's Avatar
Thread Starter
Registered User
 
Joined: Jul 2004
Posts: 1,921
Likes: 0
From: Jupiter, FL
Oh it was sheared taking it off not from the tensioner mishap....

A
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
kawazx636
The Classifieds GraveYard
34
Oct 6, 2021 03:03 PM
Dale Johnston
86-95 Trucks & 4Runners (Build-Up Section)
11
Oct 31, 2015 10:22 PM
voiddweller
Newbie Tech Section
4
Oct 2, 2015 07:47 AM
hiluxinargentina
86-95 Trucks & 4Runners
3
Sep 30, 2015 05:51 PM
Cycles
86-95 Trucks & 4Runners
8
Sep 29, 2015 06:37 AM




All times are GMT -8. The time now is 02:37 AM.