I'm about to replace the clutch in my 90 22RE 4x4 this week and I thought I had a W56 but now I'm not so sure I just need to know so I can torque it to the engine properly. It's a 1990 single cab 22re 4X4 no power or options whatsoever. Is there a site or something where I can type in the VIN and it will tell me?

 

Does your rig have A.D.D or manual hubs?

what are you trying to torque?

 

manual hubs, I was just reading a write up that said the transmission to engine is 53 ft/lbs for the G58, I don't know if I have a G58 or W56.

 

here's the link:

http://www.4x4wire.com/toyota/4Runne...enance/clutch/

 

http://www.4x4wire.com/toyota/faq/parts/

scroll down to transmissions

 

nice , W56 as I thought

 

my tranny ID is inconclusive. ive been researchng for days now! it looks like the g58 but my 86 turbo runner has manual hubs, not ADD. it is top shift. and it is not the r151f cuz the PO swapped it to a manual and it does not hav the rubber plug. ive looked at all the pics of trannys on the marlins page but none of them look like mine, even the W56. my 4wd does not work, could it be that the previous owner put a G58 that was meant for ADD into my truck with manual hubs, thus making the 4wd inoperable?