84-85 Trucks & 4Runners 2nd gen pickups and 1st gen 4Runners with solid front axles

wiring issue and wont start

Thread Tools
 
Search this Thread
 
Old Aug 4, 2009 | 01:06 PM
  #1  
Alter Ego's Avatar
Thread Starter
Registered User
 
Joined: Mar 2009
Posts: 34
Likes: 0
wiring issue and wont start

hmm, ok this morning i go out and the truck won't start, i try jumping it off the wife's car, and no good. still just clicks. got ahold of a buddy, and his jeep jumped it in about 30 seconds. drove to work, and when i turned the key from on to acc everything died. period. everything turned off, the radio, lights everything. but my cb which is wired straight to the battery still turns on with no issues. is there a relay in the steering column i should look at? or a fuse somewhere? pretty sure the batterys isn't bad, since the cb will still turn on, but might end up swapping it out with the extra in the toolbox.

84 4x4 single cab 22r. has a new startera and the ignition lock piece in steering column.
Reply
Old Aug 4, 2009 | 01:25 PM
  #2  
aalan's Avatar
Registered User
 
Joined: Jul 2009
Posts: 85
Likes: 0
From: anderson, s.c.
Sounds like a simple bad connection to me. Check the tightness of both battery post and the wire at the starter.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Crazychris1871
86-95 Trucks & 4Runners
15
Jun 27, 2016 10:38 AM
voiddweller
86-95 Trucks & 4Runners (Build-Up Section)
19
May 2, 2016 09:10 PM
serenity03k64
86-95 Trucks & 4Runners
0
Jun 27, 2015 07:59 AM
slider417
86-95 Trucks & 4Runners
1
Jun 22, 2015 10:18 AM
Dennis140
86-95 Trucks & 4Runners
14
Jun 17, 2015 10:37 AM




All times are GMT -8. The time now is 07:24 AM.