Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

should I trade my 4runner for this truck?

Thread Tools
 
Search this Thread
 
Old May 13, 2009 | 10:25 AM
  #1  
chrisbnaz's Avatar
Thread Starter
Registered User
 
Joined: Aug 2008
Posts: 369
Likes: 1
From: Mesa AZ -> Federal Way, Wa
should I trade my 4runner for this truck?

Hey guys haven't been around in a long time, been really busy with work and moving to a new house, anyways I wanted to get yotatechs opinion, should I trade my 86 4Runner for this 82 Pickup? It's got 3" body lift, 5" spring lift, 37s, 4spd, rebuilt motor, new driveshafts, dual shocks on the front etc..Went to check it out last night and basically its up to me, I love the 4Runner but I'm looking for a weekend wheeler now and I have the camaro to dd, the 4Runner needs quite a bit to get it where I want wheelin wise. The only thing that worries me about the 82 is that it's carb'd, it does have a weber though and he says he hasn't had any problems with it stalling at steep angles.

Heres a couple pics of the 82..




Reply
Old May 13, 2009 | 10:30 AM
  #2  
Kiroshu's Avatar
Registered User
 
Joined: Oct 2007
Posts: 2,747
Likes: 3
From: NC
He obviously wants to get rid of it for a reason... you might wanna do more homework... i know its only opinion but keep your runner. save some money build it up. i love my 86 runner and would give it up for nothing. plus your 22re will do better than the 22r over the long run.
Reply
Old May 13, 2009 | 10:33 AM
  #3  
chrisbnaz's Avatar
Thread Starter
Registered User
 
Joined: Aug 2008
Posts: 369
Likes: 1
From: Mesa AZ -> Federal Way, Wa
He's getting rid of it because he had an 85 4Runner and wants another, he has the resources to sas it and all that stuff which I don't right now.
Reply
Old May 13, 2009 | 10:35 AM
  #4  
Kiroshu's Avatar
Registered User
 
Joined: Oct 2007
Posts: 2,747
Likes: 3
From: NC
You mean to tell me hes trying to make you trade? PHsst. Tell him to go on craigslist. Its nice but i don't like how the bed is shortened....
Reply
Old May 13, 2009 | 10:38 AM
  #5  
chrisbnaz's Avatar
Thread Starter
Registered User
 
Joined: Aug 2008
Posts: 369
Likes: 1
From: Mesa AZ -> Federal Way, Wa
Originally Posted by Kiroshu
You mean to tell me hes trying to make you trade? PHsst. Tell him to go on craigslist. Its nice but i don't like how the bed is shortened....
Actually I put the 4Runner on craigslist for trade just to see what kind of offers showed up. I was just curious if anything interesting would show up, and this truck has my attention. Like I said, I checked it out last night, drove it and there weren't any glaring issues with it. It's rough around the edges, but it's not a daily driver and I don't care about asthetics for a weekend toy.
Reply
Old May 13, 2009 | 10:40 AM
  #6  
yoder519's Avatar
Registered User
 
Joined: Feb 2008
Posts: 1,816
Likes: 2
From: virginia
thats a sweet rig. i love the looks of a bobbed 1st gen. does it have stock gears? lockers?
Reply
Old May 13, 2009 | 10:42 AM
  #7  
chrisbnaz's Avatar
Thread Starter
Registered User
 
Joined: Aug 2008
Posts: 369
Likes: 1
From: Mesa AZ -> Federal Way, Wa
Not locked, 4.88s, lockers are high on the list if I go for it.
Reply
Old May 13, 2009 | 10:43 AM
  #8  
Kiroshu's Avatar
Registered User
 
Joined: Oct 2007
Posts: 2,747
Likes: 3
From: NC
Well its up to you man. If you want a money opinion? Then its worth the money conidering what hes got in it compared to your basic stock runner. Hes got atleast 2000$ into the mods on that truck easy and another 1000$ mechanical.... not counting the rareity of the pick-up itself. sooo technically its worth it.... IF YOU LIKE IT! It looks capable of doing anything you want to do with it.
Reply
Old May 13, 2009 | 10:45 AM
  #9  
yoder519's Avatar
Registered User
 
Joined: Feb 2008
Posts: 1,816
Likes: 2
From: virginia
go for it! if this was gonna be your only transportation then id say no but for a trial rig... id do it.
Reply
Old May 13, 2009 | 10:45 AM
  #10  
bxlt's Avatar
Registered User
15 Year Member
 
Joined: Oct 2008
Posts: 373
Likes: 2
From: Ellensburg, WA
While I LOVE 1st gen trucks I also LOVE 1st gen 4Runners and if it were me I would keep the Runner
Reply
Old May 13, 2009 | 10:58 AM
  #11  
904_runner's Avatar
Registered User
 
Joined: Mar 2008
Posts: 3,870
Likes: 4
From: Chico, California
He cut the back of the cab out..

FAIL i hate it when people do that on trucks.
Reply
Old May 13, 2009 | 11:01 AM
  #12  
yoder519's Avatar
Registered User
 
Joined: Feb 2008
Posts: 1,816
Likes: 2
From: virginia
Originally Posted by 904_runner
He cut the back of the cab out..

FAIL i hate it when people do that on trucks.
holy crap i didnt even notice that! now everytime i look at it its all that i see. i seen a 1st done like this and had a flat bed with seats in the back and a roll cage. it was sweeeeeet
Reply
Old May 13, 2009 | 11:06 AM
  #13  
oldgold3vze's Avatar
Registered User
 
Joined: Jan 2008
Posts: 341
Likes: 1
From: Loveland, CO
No matter what you do, you're still looking into a few grand to turn either one into a good trail rig. 4.88s are ideal only up to a 33, no matter what anyone tells you. Lockers are a must. What is his steering configuration? If it's not crossover, then you can plan on switching that over. What about transfer case gears? You're gonna want at least a single 4.70 case, if not duals. Does the front axle have longs? Etc, etc, etc....

You must remember that ANY truck can become a wheeler. Ultimately, you're still driving the TRUCK, not the MODS under it. A lift and a big set of tires is NOT a built truck, just a start. That being said, I can find rust free 1st gen runners all day long for $1200-$2000 here in Colorado. 1st gen trucks are a little harder to find, but still around. I have a fully built 84 standard cab, and a stock 88 runner, and I'd much rather have a built runner with efi any day. My biggest complaint is seating. At best it's me and a friend, and usually that friend is my dog, so not much conversation there. There's a lot to think about.

Actually, I just changed my mind after looking at the pics a little deeper. Dual front shocks, stock cross member, stock length lift springs, and a friggin' 3" body lift. That truck is a poser, keep the runner and build it up right when you get around to it.

Last edited by oldgold3vze; May 13, 2009 at 11:09 AM.
Reply
Old May 13, 2009 | 11:22 AM
  #14  
space-junk's Avatar
Registered User
iTrader: (1)
 
Joined: Aug 2008
Posts: 5,527
Likes: 118
From: Wilton, CA
if you are serious about it, check out everything as the others posted, then tell him, since its gonna bw a weekend wheeler, that you wanna test drive it offroad...


my bet is that you wont like the ride... if it were up to me, id keep the runner... more potions, and you dont have to deal with someone else's hack job... you know everything thats been done to your runner... do you know EVERYTHING thats been done to the 82?

thought not...
Reply
Old May 13, 2009 | 06:01 PM
  #15  
mattaway's Avatar
Registered User
 
Joined: Dec 2008
Posts: 432
Likes: 1
From: NFM, Florida
i'd trade him if it....

1. didn't have a body lift
2. wasn't bobbed
3. wasn't half-assed turned into a 4runner

Reply
Old May 13, 2009 | 07:41 PM
  #16  
Justinlhc's Avatar
Registered User
 
Joined: Feb 2009
Posts: 590
Likes: 0
IMO, the only thing that truck has going for it is big tires and a SFA. Any pics of the 4Runner?
Reply
Old May 13, 2009 | 08:15 PM
  #17  
Matt16's Avatar
Registered User
 
Joined: Oct 2007
Posts: 5,377
Likes: 5
He went to 35's and did a massive lift without spending a couple hundred on lockers. WTF. FAIL. He probably did it mostly for looks and didn't care much about performance. Take note and proceed with caution.
Reply
Old May 13, 2009 | 10:34 PM
  #18  
t0mwat3r's Avatar
Registered User
 
Joined: May 2008
Posts: 137
Likes: 0
From: Sierra Vista Arizona
Originally Posted by Matt16
He went to 35's and did a massive lift without spending a couple hundred on lockers. WTF. FAIL. He probably did it mostly for looks and didn't care much about performance. Take note and proceed with caution.
maybe he had lockers and lower gears and he removed em for the sale? that what i would do
Reply
Old May 14, 2009 | 12:05 AM
  #19  
chrisbnaz's Avatar
Thread Starter
Registered User
 
Joined: Aug 2008
Posts: 369
Likes: 1
From: Mesa AZ -> Federal Way, Wa
Thanks guys, decided to hold off and see what else comes along.
Reply
Old May 14, 2009 | 12:48 PM
  #20  
Justinlhc's Avatar
Registered User
 
Joined: Feb 2009
Posts: 590
Likes: 0
Originally Posted by chrisbnaz
Thanks guys, decided to hold off and see what else comes along.
Good choice.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
merc1100sc
Newbie Tech Section
3
Jun 26, 2015 05:24 PM
TheManOutside
95.5-2004 Tacomas & 96-2002 4Runners
0
Jun 18, 2015 03:32 PM
duckhead
3.4 Swaps
7
Jun 18, 2015 06:54 AM




All times are GMT -8. The time now is 06:31 PM.