question about 63 chevy's
#1
question about 63 chevy's
so i was thinkin about getting the chevy springs and wanted to be sure what i was looking for. where does the "63" come from? is that how long they are in inches or is that the year they came off of? and what did they come off of. what things should i look for when looking for them and where can i find them?
#2
http://www.pirate4x4.com/forum/showt...threadid=20665
everything you need to know
everything you need to know
#3
ive been looking at the same thing, but through my searching ive found that ford 53" springs would be better suited for my needs (easier to fab up and flex just as much) the ford springs are off set longer to one end, so you can retain your stock rear hanger and move your front hanger forward 11" and make a rear shackle to fit your lift, i have a 4" lift so i would need a 6" shackle
#4
so i was thinkin about getting the chevy springs and wanted to be sure what i was looking for. where does the "63" come from? is that how long they are in inches or is that the year they came off of? and what did they come off of. what things should i look for when looking for them and where can i find them?
88-98 1500 Chevy's 4wd or 2wd (4wds have 3 leaves + OL, 2wds have 2 leaves + OL)
Junkyard!
http://www.pirate4x4.com/forum/showt...threadid=20665
everything you need to know
everything you need to know

ive been looking at the same thing, but through my searching ive found that ford 53" springs would be better suited for my needs (easier to fab up and flex just as much) the ford springs are off set longer to one end, so you can retain your stock rear hanger and move your front hanger forward 11" and make a rear shackle to fit your lift, i have a 4" lift so i would need a 6" shackle
#6
not alot of figurin involved 
Front hanger 11" forward (eye-to-eye) of the stock front.
Rear hanger 4" back (eye-to-eye) of the rear ( all I did for mine was butted the new hanger to the back of the old one and welded it there)

Front hanger 11" forward (eye-to-eye) of the stock front.
Rear hanger 4" back (eye-to-eye) of the rear ( all I did for mine was butted the new hanger to the back of the old one and welded it there)
Thread
Thread Starter
Forum
Replies
Last Post
priest16
84-85 Trucks & 4Runners (Build-Up Section)
15
Aug 6, 2015 07:43 AM
TJWilly
95.5-2004 Tacomas & 96-2002 4Runners
6
Jul 31, 2015 02:05 PM




