Does a '98 3.4 have an ignition control module?

 

Yes. Go to the autoparts store and look one up. I am not sure if the ECM takes care of that because all that module would do is control the coils and power them up so check to make sure.

 

well the autoparts show one but I have never seen one anywhere on my truck nor heard of one going out on a 4runner.

 

There is an ignition module..Its a flat black thin looking,10(?) pin componant bolted on the RF fender below the MAF........Although an ignition module is very rare for the 4runner its very rare to see one go bad in a Toyota period,Usually will have no spark at all on any coil pack or no turning on and off of the coil-for-distributer system....

looks like this:

 

I looked and I dont think mine has one

 

This is a cool site.you can get part#'s and see what the parts guys at the dealer see.

http://www.toyodiy.com/parts/p_U_199...KA_8401.4.html


Here is your missing igniter assy...AKA ignition module
Part# 89620 in pic..circled