i am gettin ready to order my 3in body lift off of 4crawler..

just i am wonderin what i do need and what i don't

i have a auto so i am gettin the auto bracket

i was wondering about the steering??

let me kno who ever has done this what they used

also i have a smitty front bumper soo i don't need the bumper bracket..


u waS wonderin where n how to get to all my body mounts r

i think i have to lift the carpet up to get to the body mounts?


thanks for any help

 

The kit will come with everything you will need. But when you order, make sure you let them know it's an auto and everything, and they'll make sure you get everything.

 

The instructions on his website are extremely thorough. They cover almost any problem you would run into.

 

HUH? If you can't find your body mount bolts you might not want to take on this project

 

i kno whew the body mounts bolts are
i was just wondering how to get to the tops of them
lift my carpet up right??

 

You need:

-All the lift blocks and hardware
-Rad drop brackets
-Steering shaft extension (mine required a new plate for the firewall that located the steering colum hole lower)
-auto linkage extension
-Front bumper brackets

Just becasue you have a smitty bilt it doesnt change the fact it mounts to the frame. If you leave it alone it will be 3" lower on the body they it should be..... That will look goofy.

Yes you have to lift the carpet corners/sides to get to all the mounts. But its easily accessable. These trucks are pretty simple to work on.

 

I think I'll be ordering one of these kits and a set off lifted rear springs for my 1995 4runner I picked up Saturday. Im guessing I should be able to install a set of 33" tires on it without having to worry about body contact