Cannot find my factory manual, tried Search
I have always done these without a torque wrench but I need the torque/ ft lbs specs for the differential drain and fill bolts and the auto-trans drain bolt.
thx

 

ive never used a torque wrench i just get then snug then about a half turn now if i was doin something with the motor then i would use one

 

This was posted by Elton on UY:

Transfer Case Fill Gasket 90430-18008 27 Ft-Lb
Transfer Case Drain Gasket 90430-18008 27 Ft-Lb
Front Differential Fill Gasket 12157-10010 29 Ft-Lb
Front Differential Drain Gasket 90430-24003 48 Ft-Lb
Rear Differential Fill Gasket 12157-10010 36 Ft-Lb
Rear Differential Drain Gasket 12157-10010 36 Ft-Lb

 

ahhh good someone found that i couldin't remember were i posted it

 

I beleive the transmission drain bolt torque is 15ft-lb.