3rd Gen Front/Rear Bumper Assy + misc pieces READ ME
#1
3rd Gen Front/Rear Bumper Assy + misc pieces READ ME
Hello all,
All parts I am looking for are going on my 2000 base model 4runner
1) I am looking to pickup a new front bumper assembly due to some collision damage: valance, chrome piece, filler (although i think my filler can be reused).
2) The front bumper reinforcement bar and mounts need to be replaced as they were damaged in a previous collision.
3) Rear bumper is rusted the F*&#$ out. Chrome or Gray rear bumper, not too picky here. anything looks better than flaking brown metal pieces
4) my front-most running board brackets have rusted out and need to be replaced (both pass and driver side brackets). Also, the front plastic runningboard caps have cracked due to the excess pressure resulting from the front brackets rusting out.
Let me know if you guys have anything. Thanks for Lookin
EDIT: also looking for the following (allbeit further down the line, but figured i might as well post it now):
- OEM fog lights (with brackets)
- Scion HU (T1808 preferable) + Ipod wiring
All parts I am looking for are going on my 2000 base model 4runner
1) I am looking to pickup a new front bumper assembly due to some collision damage: valance, chrome piece, filler (although i think my filler can be reused).
2) The front bumper reinforcement bar and mounts need to be replaced as they were damaged in a previous collision.
3) Rear bumper is rusted the F*&#$ out. Chrome or Gray rear bumper, not too picky here. anything looks better than flaking brown metal pieces
4) my front-most running board brackets have rusted out and need to be replaced (both pass and driver side brackets). Also, the front plastic runningboard caps have cracked due to the excess pressure resulting from the front brackets rusting out.
Let me know if you guys have anything. Thanks for Lookin
EDIT: also looking for the following (allbeit further down the line, but figured i might as well post it now):
- OEM fog lights (with brackets)
- Scion HU (T1808 preferable) + Ipod wiring
Last edited by skolinsk; May 3, 2008 at 11:43 AM. Reason: addition
#3
That's an odd combination, isnt it? I could take the middle piece to save a few bucks as long as its in good condition..
#4
where are you located? i have a rear bumper from a 97 if it'll work
#5
i have a complete 99 that is black--you of the side bumper parts has a dent in it though about the size of a baseball.
Like Tofer said--where you be?
Like Tofer said--where you be?
#6
I'm up in vermont. sorry i thought i filled that part out in my profile..
also, im not sure about other year's bumpers working on my 4runner. anyone know for sure??
also, im not sure about other year's bumpers working on my 4runner. anyone know for sure??
Last edited by skolinsk; May 2, 2008 at 11:35 AM.
Trending Topics
#8
#9
Whoops--read my post and it didnt make sense.....i have the rear bumper parts. THey are black and one of the side skirts has a dent in it about the size of a baseball.
#12
I've got a complete rear in chrome. Only a dent or two I can get pics for you. I'm sure shipping will be a bit spendy.
Edit: SOLD
Edit: SOLD
Last edited by toy_tek; Jun 3, 2008 at 04:46 PM.
#13
anyone got these parts closer to New England? Shipping is starting to seem financially impractical..
#14
I have a 96 Limited bumper and brackets in terrific condition, was asking $150 + shipping but will make a better deal on this site. PM me if interested.
Jason
Jason
Hello all,
All parts I am looking for are going on my 2000 base model 4runner
1) I am looking to pickup a new front bumper assembly due to some collision damage: valance, chrome piece, filler (although i think my filler can be reused).
2) The front bumper reinforcement bar and mounts need to be replaced as they were damaged in a previous collision.
3) Rear bumper is rusted the F*&#$ out. Chrome or Gray rear bumper, not too picky here. anything looks better than flaking brown metal pieces
4) my front-most running board brackets have rusted out and need to be replaced (both pass and driver side brackets). Also, the front plastic runningboard caps have cracked due to the excess pressure resulting from the front brackets rusting out.
Let me know if you guys have anything. Thanks for Lookin
EDIT: also looking for the following (allbeit further down the line, but figured i might as well post it now):
- OEM fog lights (with brackets)
- Scion HU (T1808 preferable) + Ipod wiring
All parts I am looking for are going on my 2000 base model 4runner
1) I am looking to pickup a new front bumper assembly due to some collision damage: valance, chrome piece, filler (although i think my filler can be reused).
2) The front bumper reinforcement bar and mounts need to be replaced as they were damaged in a previous collision.
3) Rear bumper is rusted the F*&#$ out. Chrome or Gray rear bumper, not too picky here. anything looks better than flaking brown metal pieces
4) my front-most running board brackets have rusted out and need to be replaced (both pass and driver side brackets). Also, the front plastic runningboard caps have cracked due to the excess pressure resulting from the front brackets rusting out.
Let me know if you guys have anything. Thanks for Lookin
EDIT: also looking for the following (allbeit further down the line, but figured i might as well post it now):
- OEM fog lights (with brackets)
- Scion HU (T1808 preferable) + Ipod wiring
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
Jun 1, 2021 01:51 PM
FS[PacSouthWest]: 2- 8"3rd members:4.88 ratchet lockers,new setup kit, rear axle rebuild kit,diff armor
jerusry
Axles - Suspensions - Tires - Wheels
1
Oct 19, 2015 05:28 PM
FS[SouthEast]: 1st Gen 4Runner Slider Window, Driver Side
coryc85
Misc Stuff (Vehicle Related)
0
Jul 6, 2015 04:07 AM
Vargntucson
95.5-2004 Tacomas & 96-2002 4Runners
0
Jul 4, 2015 12:15 PM



