General Electrical & Lighting Related Topics Ask here for electrical, wiring, and lighting info for your rig that could apply to all years

Odometer, ABS, VSC quit working...help!

Thread Tools
 
Search this Thread
 
Old Dec 31, 2007 | 05:40 AM
  #1  
4Player's Avatar
Thread Starter
Registered User
 
Joined: Oct 2007
Posts: 9
Likes: 0
Question Odometer, ABS, VSC quit working...help!

'03 4Runner V8 SR5 4X4, all stock except for a K&N cold air intake.....

Thanks for any help or suggestions, in advance.

Christmas Eve was quite a cold one here in Denver, about 8F. I did a little street driving in some light snow accumulation, nothing over the axles. The truck sat until the 26th, I go to warm it up, and the following happens:

The ABS light, both VSC lights, the E-brake warning light, and the engine warning light all remain on and illuminated after I start the vehicle and release the key! No funny sounds, no alarms, and nothing else operates out of the ordinary. So I decide to take it for a drive and everything works as normal, except: the odometer, the trip, the vehicle skid control and the ABS are not functioning, and again all the lights I mentioned remained illuminated.

I've checked all the regular looking fuses in the cab and the engine bay, but I have no way to check the bigger square box relays/fuses. There are 2 marked "ABS" in the engine bay, but I have no idea if they're bad or if they're the cause of the problem(s).

I put the truck on a lift and nothing is obviously broken or disconnected around the tranny or transfer case, but I could be missing something more "hidden".

Any suggestions or ideas for me to self-diagnose and/or fix the problem would be much appreciated, I'm currently out of work and the finances are incredibly tight. Thanks a ton, crew! Happy New Gear!

cwillard602@yahoo.com
303.717.4731
Reply
Old Dec 31, 2007 | 06:20 AM
  #2  
SEAIRESCUE's Avatar
Registered User
 
Joined: Apr 2007
Posts: 491
Likes: 1
Snow, and resulting ice from car heat, may have collected at a wheel sensor and resulted in an ABS code. I could suspect, but doubt, that something happened to the speed sensor in the transfer case. Not the sensor itself but the external wiring at the connector.

I would go to a car wash and clean each wheel from the inside. You will likely find accumulated ice near the brakes/speed sensor. By cleaning the ice off, the sensor may start working. I think there is one on each wheel.

My $0.02
Reply
Old Jan 28, 2008 | 12:36 PM
  #3  
4Player's Avatar
Thread Starter
Registered User
 
Joined: Oct 2007
Posts: 9
Likes: 0
Seairescue--

Thanks, a ton, your suggestions paid off--literally! I didn't have to remove the wheels but I did visit a nice carwash with undercarriage water jets and the problem has resolved itself. Slowly but surely the speedo and odo came back, then the e-brake light turned off, then the VSC lights turned off and I haven't had any problems since. Thankfully, I didn't have to visit the dealership, the systems are working again, AND I have a clean truck. Thanks, again.

Respectfully,

C. R. Willard
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
kawazx636
The Classifieds GraveYard
34
Oct 6, 2021 03:03 PM
taraf
Pre 84 Trucks
2
Sep 25, 2015 02:57 PM
matt1833
95.5-2004 Tacomas & 96-2002 4Runners
0
Sep 16, 2015 07:11 AM
zz_denis
95.5-2004 Tacomas & 96-2002 4Runners
2
Sep 6, 2015 03:43 PM




All times are GMT -8. The time now is 11:01 PM.