Downey Air Cleaner Kit
#1
Downey Air Cleaner Kit
Downey 3.0 Air Cleaner Kit. Kit has been modified and was installed, but never used. $100.00 (or make offer) + shipping, paypal only. Details (see pics):
I machined the mounting tabs of the casting to fit the wheel well better, machined a pocket for the gasket that fits between the casting and VAFM, reamed the 4 thru holes to reuse the spacers from the stock air cleaner cap, and machined a fitting to replace the garbage that Downey used to attach the Resonator tube. I also cut the intake tube length to fit between the throttle housing and VAFM without contacting either. Afterwards, I installed a 1" body lift and the tube was now slightly short, so I cut a short length of tube and silicone hose to restore length. I also stuck the CARB sticker to the truck and managed to pull it off in one piece with no rips or tears.
Last edited by cadman; Nov 3, 2007 at 11:26 PM.
#4
shoot me your paypal info also do you know of any 3.0 motors around you? mine did not know how to swim
Trending Topics
#8
I am still thinking about this and the only worry i have is wether or not the tube modifications will still fit ok on mine. I dont, and will not have any body lift. Will this tube still fit fine?
#9
The intake tube will work with or without a body lift and allow you to mount the air cleaner without stress on any of the components.
Thread
Thread Starter
Forum
Replies
Last Post
FS[PacSouthWest]: 2- 8"3rd members:4.88 ratchet lockers,new setup kit, rear axle rebuild kit,diff armor
jerusry
Axles - Suspensions - Tires - Wheels
1
Oct 19, 2015 05:28 PM




