Spring Height 3rd gen 4runner
Oct 2, 2007 | 07:53 AM
#1
Thread Starter
Registered User
Joined: Aug 2007
Posts: 3
Likes: 0
Spring Height 3rd gen 4runner
I have a 1999 4 runner and it currently sits level. Distance from fender to ground (front/rear) is the same. I have new Bilstein HD struts/shocks.
Is this normal or has my rear springs sagged an inch? Most trucks come with an inch higher rear end which makes it better for hauling and towing. "Level while hauling/towing vs squatting". If they have sagged I guess I have to buy new rear springs. If so any suggestions?
Is this normal or has my rear springs sagged an inch? Most trucks come with an inch higher rear end which makes it better for hauling and towing. "Level while hauling/towing vs squatting". If they have sagged I guess I have to buy new rear springs. If so any suggestions?
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
Jun 1, 2021 01:51 PM
FS[PacSouthWest]: 2- 8"3rd members:4.88 ratchet lockers,new setup kit, rear axle rebuild kit,diff armor
jerusry
Axles - Suspensions - Tires - Wheels
1
Oct 19, 2015 05:28 PM
