You know, the mods you think about before you fall asleep at night, daydream at work, ect

My next few mods that linger in my brain that sends me to the Internet to do research on.

1. New 1 7/8" rings from Fourtreks.
Moving my Hi-Lift jack from the factory rack to the front of the ARB bumper.
Lower center of gravity is my primary purpose for changing locations of the rings.

2. Blue Torch Fab Optima Battery Tray
Members KD7NAC_07FJ and Chewey46 both have the tray, although it takes a little extra bit of modifications.

3. Safari snorkel distributed through ARB USA
Bottom of the page at the time of this posting.

Although not yet quite out, it will be here before to long.
This will be used mainly for the dust I encounter whilst offroad, not for water crossings.

4. Still want to relocate the ARB fridge from on top of the cargobox to the top of the left rear seat when in the down position.

These are at the forefront now on my list of things to do.

 

Lockers and 4.88 Gears,I stay up and dream about lockers, i can even hear the air compressor making the noise to lock the lockers.

2.5 inch lift also, Got to find a good lift with decent articulation

and sliders! I'm way behind on the mods list, poor college student... but hopefully in about 3 years ill be moving into a house with a killer garage

 

Nothing, I cant afford anything.

 

Lingering in my noggin? How about lingering in my garage - waiting for slightly cooler weather.

In the garage:
ARB compressor
Rear diff with ARB that I will be installing 4.88's on
Tundra 199mm brakes
Stainless Steel front brake lines
Polk front 6.5" component speakers
---
in the noggin:
Waiting on another local YT'er to remove his front diff with ARB & 4.88's (hopefully I still have dibs)
Cargo box with sleeping platform and dual 10" subs
Second battery with cutout switch
Hi Lift and shovel mounts for my factory rack
aux lighting
fuel tank skid

 

Do not forget to add HUGE air-con unit for the garage

 

ya about those thoughts, if i had the money i would rebuild my engine. ts/t4 turbo, bigger inj, fuel pump, rebuilt trans, 5" SAS, new interior, and if i had the time to clean out the fuel tank.

those would be those thoughts in the ''noggins''

 

My new FULL Supercharger setup with all the trimmings...

SC, URD 7th kit, new ECU, headers, new exahust, smaller pully ect...

new lighter pully set for all the ones under the hood (FREE POWER!) lift, lockers, wheels/tires.

You name it i want it but that dang wallet says that it has to wait... oh well that is some of what i dream about before drifting off...

 

Oh...haha... I got that! But its just cooling down all the crap in the garage that is taking up too much space to pull the truck in!

 

way to many mods!

1st. Install my roll bar

2nd. lights, 4 hella 500 6" 2 fogs and 2 driving

3rd. bj spacers and add-a-leaf

4th. custom rear tube bumper

5th. gears and lockers...

I could go on and on and on If my truck was the way I wanted it right now I would be in debt a few grand

 

I'd like to finish building my stereo, repaint the trim, finish removing my badges, and build a custom grille. I'd also like to either get some new 18" wheels, lexus wheels, or paint the stockers...I'd like to get a CB and build a GPS or navigation system into the dash, then remodel the center consol to hold a couple of drinks...

 

1)Have the stock pressure bent pipe between my exhaust manifold and cat ripped out and replaced with a 2" mandrel bent 304 s/s pipe to help increase flow and throttle response/torque (probably not much but something) to compliment my 2" Borla mandrel bent catback.

2) New O2 sensor to help restore power and fuel economy - not really a mod but...

3) I'm scheduled in late Sept. to have my front right & left fenders removed and replaced with fiberglass ones and painted to match stock by Toyota fiberglass in Penticton BC.

4) Contemplating what I am going to do to get more power to help with towing a boat down the road and going up reasonable passes loaded with camping gear. Thinking about either a) Advancing timing b) Cams, or least preferable c) Headers

 

someday down the road a 3rz swap.
in the forseeable future, tube\flat bed of some sort.

 

How about sitting in my parents garage cause I live in an apartment.

1. Installing the elocked axle that I picked up
2. Tires

Ideas that I have:

New front bumper, maybe rear as well
fog/driving lights
brake upgrade
rear diff breather extension
fix the driver seat/get seat covers

 

Here are a few things i dream about at night.
1.)sonoran steel ifs truss
2.)new air compressor
3.)bj spacers and new bilstiens
4.)of course we could all want MORE tools!!!

getting my exhaust done next week so i cant complain. tim.

 

another truck prefer a 85 with a 4inch lift and 33's

or a clean 1st gen 4 runner with no rust and stock

 

I swear I am always dreamin about mods for my truck Yes, I am a girl, but I am not girly lol Hmmmm........ Future mods

3" body lift
35's yoko geolanders
new front and rear bumpers
turbo charger or supercharger (havent made up my mind yet)
tranny cooler
rock sliders
winch
air compressor
solid axel set up (one day in the future, after she is paid off) lol
new paint job
sport hood
billet grill
HID's
tint the driver's and passenger windows

ok, i think thats it for now

 

Next up...

Cutting off the front clip and tubing out the exo with all the things that go along with that (moving stuff)
-moving batteries
-moving fuse boxes
-extending wiring and getting rid of useless junk
-electric fan
-fuel cell
-blah blah blah

It never ends until you die or sell the rig.

 

13.5" bob and exo are next on the list. Hopefully have the bob done in the next few months, the exo might be just a winter project.

 

Wow. This could take a while.

Immediate:
Finish belly pan, only needs a bit more welding, and some paint.
Replace front shocks and relocate lower bumpstops

Near Future:
Finally cut and reweld the floor pan.
New Carpet or vinyl.
Interior expedition platform and Scout II rear seat mod.
New Rear Bumper
New Sliders

Far Future:
Fiberglass rear 1/4.
Cut off current front clip. Replace with straight one.
New left front fender
Paint.

 

Hopefully in the next few weeks.
-Finish my custom front winch bumper, (fabricator is currently sick and i now live 80 miles away from him. )
-Hook up some guide wires
-tune cb antenna
-get a new whip antenna

I have purchased but not put on yet
-OME 881's on Bilstein HD's with 5k on them