Which torque value is correct for caliper bolts

Reply Subscribe

Thread Tools

Search this Thread

Jun 29, 2007 | 05:36 PM

GhostriderTx

Thread Starter

Registered User

Joined: Dec 2006

Posts: 95

Likes: 0

Which torque value is correct for caliper bolts

I havea 2001 4WD 4 Runner. I have seen two different numbers posted. Most posts show 90 ft pounds for the caliper bolts but I thought I saw that the 4WD was only 65. Anyone have a correct answer if the 4wd is different than 2wd

Jun 30, 2007 | 12:37 PM

Yoda

Contributing Member

Joined: May 2002

Posts: 2,651

Likes: 1

From: North Bend, WA

My Mitchells program says 90 ft lbs

Jul 1, 2007 | 07:03 AM

toy_tek

Registered User

Joined: Jun 2004

Posts: 1,342

Likes: 9

From: Phoenix, AZ

This is from the 97-98 FSM

TORQUE SPECIFICATIONS (4RUNNER)

Application Ft. Lbs. (N.m)
Brake Hose-To-Caliper ...................................... 11 (15)
Caliper Mounting Bolts/Slide Pins ......................... 91 (123)
LSPV Mounting Bolts ........................................... (1)
Master Cylinder Outlet Fittings ............................ 11 (15)
Rear Axle Retainer & Backing Plate Nuts .................... 48 (66)
Wheel Lug Nuts ............................................ 81 (110)
INCH Lbs. (N.m)
Brake Bleeder Screw ........................................ 97 (11)
LSPV Adjusting Screws/Nuts ................................ 115 (13)
Master Cylinder Piston Stopper Bolt ........................ 89 (10)
Master Cylinder-To-Booster Nuts ........................... 115 (13)