WTB: Air intake Hose V-6 3.0
May 4, 2007 | 06:51 PM
#1
Thread Starter
Registered User
Joined: Jan 2007
Posts: 142
Likes: 0
From: NJ - Headin to Fl.
WTB: Air intake Hose V-6 3.0
Looking for the hose that comes off the intake and goes to the spliter. Looks like an pvc elbow.
May 4, 2007 | 11:28 PM
#2
Contributing Member
Joined: Jun 2005
Posts: 3,415
Likes: 10
From: Phx, AZ
Funny... that's exactly what I replaced mine with... a 3" PVC 45 degree elbow from Home Depot. 
A bit hard to see in this pic... but there you go. Has been working perfect for well over a year now.
A bit hard to see in this pic... but there you go. Has been working perfect for well over a year now.
May 5, 2007 | 06:22 AM
#3
Thread Starter
Registered User
Joined: Jan 2007
Posts: 142
Likes: 0
From: NJ - Headin to Fl.
Cool... Thanks for the info. Off to Lowes I go..... LOL
May 5, 2007 | 08:51 AM
#4
Contributing Member
Joined: Jun 2005
Posts: 3,415
Likes: 10
From: Phx, AZ
The rubber couplers are from the plumbing aisle. If memory serves, 2 1/2" to 3" adapters.
I got threaded brass fittings for the various hoses that tie into the intake. Drill a hole in the PVC and thread them in. Don't put any nuts on the inside... they may vibrate loose and be sucked into the engine, which would be very bad.
I got threaded brass fittings for the various hoses that tie into the intake. Drill a hole in the PVC and thread them in. Don't put any nuts on the inside... they may vibrate loose and be sucked into the engine, which would be very bad.
Thread
Thread Starter
Forum
Replies
Last Post
the1998sr5
95.5-2004 Tacomas & 96-2002 4Runners
15
Jul 14, 2020 08:35 PM
skoti89
Offroad Tech
3
Jul 8, 2015 12:05 AM
