Short shifter
Apr 3, 2007 | 06:27 PM
#3
Registered User
Joined: Jan 2007
Posts: 6,106
Likes: 27
There's one here.http://www.toyotacatalog.net/M1WebGe...spx?Class=1582
Here's some more.http://www.urdusa.com/index.php?cPath=106_73
One for the transfer case, if you were wonderin'.http://www.4crawler.com/4x4/ForSale/...wShifter.shtml
Here's some more.http://www.urdusa.com/index.php?cPath=106_73
One for the transfer case, if you were wonderin'.http://www.4crawler.com/4x4/ForSale/...wShifter.shtml
Last edited by MudHippy; Apr 6, 2007 at 08:20 PM.
Apr 6, 2007 | 08:07 PM
#6
Registered User
Joined: Mar 2007
Posts: 143
Likes: 0
From: Monroe, WA
could try what i did on my 2wd stick. i just sectioned about an inch or so out of the top, narrower part. and another inch or so from the lower, wider area. then welded the 3 peices back together. part that sucks is mine was actually 2 peices with rubber between. probably need some epoxy between them to hold them back together after the rubber burns out...which it will.
its a shorter throw, and it is physically sorter. which i also wanted. the kits are usually stock height. i have some pics of it on my street source profile here:
http://www.streetsourcemag.com/viewo...rofileid=45650
sorry, it hasnt updated the photos yet. should be soon though.
its a shorter throw, and it is physically sorter. which i also wanted. the kits are usually stock height. i have some pics of it on my street source profile here:
http://www.streetsourcemag.com/viewo...rofileid=45650
sorry, it hasnt updated the photos yet. should be soon though.
Apr 6, 2007 | 08:13 PM
#7
Contributing Member
Joined: Feb 2007
Posts: 9,055
Likes: 10
From: maple ridge, British Columbia, Canada
Looks like this one will fit our trucks ( not sure about with a 4cy though)
http://www.toyotacatalog.net/M1WebGe...B-FF6F56AFDCF2
http://www.toyotacatalog.net/M1WebGe...B-FF6F56AFDCF2
Trending Topics
Apr 6, 2007 | 08:19 PM
#8
Registered User
Joined: Jan 2007
Posts: 6,106
Likes: 27
Yeah, I geuss that was a little much to ask people, to pick that one there out of the link I posted above. Thanks Jay351, it looks like I need all the help I can get on this one.
Oh, so you know the 22re or 3RZ are both 4cyl. And yes there's a short-throw stick for them, or any Toyota practically.
Oh, so you know the 22re or 3RZ are both 4cyl. And yes there's a short-throw stick for them, or any Toyota practically.
Last edited by MudHippy; Apr 6, 2007 at 09:02 PM.
Apr 6, 2007 | 09:58 PM
#10
Registered User
Joined: Jan 2007
Posts: 6,106
Likes: 27
I believe they are. They look close to it from the pics. Check the urdusa.com link above. I think your supposed to use your stock stick with those. The piece that looks like a "pawn" would attach to the bottom of the OE shifter.
Apr 6, 2007 | 10:59 PM
#11
Contributing Member
Joined: Feb 2007
Posts: 9,055
Likes: 10
From: maple ridge, British Columbia, Canada
Yeah, I geuss that was a little much to ask people, to pick that one there out of the link I posted above. Thanks Jay351, it looks like I need all the help I can get on this one.
Oh, so you know the 22re or 3RZ are both 4cyl. And yes there's a short-throw stick for them, or any Toyota practically.
Oh, so you know the 22re or 3RZ are both 4cyl. And yes there's a short-throw stick for them, or any Toyota practically.
heh, I never heard of a 3rz
Im tehhh newb sauce
Apr 7, 2007 | 06:52 AM
#13
Registered User
Joined: Feb 2007
Posts: 1,171
Likes: 1
From: fl
i went to the first link hippy, and i believe that short shifter would work with just about any yota in this forum. however, i couldnt stop there. just had to go and look at turbochargers. ugh. why dont i have money? lol
Thread
Thread Starter
Forum
Replies
Last Post
