3.4 air filter
Jan 19, 2007 | 03:55 PM
#1
Thread Starter
Registered User
Joined: Dec 2004
Posts: 1,032
Likes: 0
From: So MS
3.4 air filter
3.4 swap almost complete,What air filter and intake did you use on your swaps?I would like to use a stock/modified 3.4 air filter housing.Any ideas?Looks to me like it will almost bolt right up.
Jan 19, 2007 | 04:33 PM
#2
Contributing Member
Joined: Jan 2006
Posts: 899
Likes: 0
From: Summit County, Colorado
My donor came with a K&N intake on it, so I used the tube, but I went to a Trueflow filter on it. I can't vouch for power gains, as I have nothing to compare it to, but I like the sound!
Check Mt Goat's 3.4 build up thread - he used the stock Taco intake, as I recall.
Check Mt Goat's 3.4 build up thread - he used the stock Taco intake, as I recall.
Jan 19, 2007 | 07:42 PM
#5
Contributing Member
Joined: Nov 2002
Posts: 10,666
Likes: 5
From: Oklahoma State
Yep, stock Taco airbox with stock OEM filter. I'd get a Amsoil filter (non-oil type) if they made a drop in replacement for the stock airbox. The thing you need to realize is the 5VZFE MAF (unlike the 3VZ-E AFM) is very sensitive to oil and dirt contamination so oil-less air filtration is the way to go IMHO.
Jan 20, 2007 | 04:02 PM
#7
Use a 3.4 factory air box, TrueFlow air filter, and an Air Raid intake tube....
I've seen used air boxes on eBay. Northridge Toyota sells TrueFlow air filters for about $45 shipped. The AirRaid "MIT" runs about $100.
I've seen used air boxes on eBay. Northridge Toyota sells TrueFlow air filters for about $45 shipped. The AirRaid "MIT" runs about $100.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Tacoma1313
95.5-2004 Tacomas & 96-2002 4Runners
2
Aug 17, 2015 05:44 PM
Toyvana
General Vehicle Related Topics (Non Year Related)
1
Jul 29, 2015 10:47 PM
