Need help w/ 3.4 EVAP
Nov 28, 2006 | 02:42 PM
#1
Thread Starter
Registered User
Joined: Apr 2006
Posts: 297
Likes: 0
Need help w/ 3.4 EVAP
re: 98 4runner engine (non-CA) in a 93 4 runner
No, no codes... I just have a routing question. I know where most of the lines go (based on pics), but the hose that goes down to a hard line (the second hose from the front). it appears to go to a free-air vent or something; what does this connect to?
I know of these connections:
1. To 'airbox'
2. unknown down to a hard line that runs down toward the front framerail (NOT THE HOSE THAT GOES TO THE TANK) In the pic below, it's the line just above the white label on the evap cannister.
3. VSV to intake (vac)
4. hose that goes to a hard line, that runs back to the tank.
No, no codes... I just have a routing question. I know where most of the lines go (based on pics), but the hose that goes down to a hard line (the second hose from the front). it appears to go to a free-air vent or something; what does this connect to?
I know of these connections:
1. To 'airbox'
2. unknown down to a hard line that runs down toward the front framerail (NOT THE HOSE THAT GOES TO THE TANK) In the pic below, it's the line just above the white label on the evap cannister.
3. VSV to intake (vac)
4. hose that goes to a hard line, that runs back to the tank.
Last edited by 89934runr; Nov 28, 2006 at 03:50 PM.
Nov 30, 2006 | 08:40 AM
#4
Contributing Member
Joined: Nov 2002
Posts: 10,666
Likes: 5
From: Oklahoma State
IIRC that is like you said some kind of free air vent. I think it just sticks into a hole in the frame. But your original hole in the frame is on the other side isn't it, so maybe find a new one or just let it hang somewhere. I'm not sure why they put it in the frame anyway.
Thread
Thread Starter
Forum
Replies
Last Post
Steven.m.paulk
86-95 Trucks & 4Runners
4
Jun 7, 2020 10:45 AM
primordialbeast117
86-95 Trucks & 4Runners
11
Dec 19, 2015 12:23 PM
