This is the 4Runner clinometer that bolts into the left side of the 4Runners that were produced for the non American market, otherwise, right hand drive vehicles.
That was the only way to get one, they were not produced for American or Canadian 2nd gen 4Runners.

I believe this is also the same one that 3rd gen owners use when putting one in their dash.

The base is no longer on this, as I had it modified to fit on the right side of my dash.
Also is has been covered by a stereo shop in a blue material to kind of match the inside of my rig.

There is a quick disconnect cable on it to plug into power, but I can not include the other end that is wired to my rig.
I am sure you can get the plugs at any electronics shop.

You could use this as is, or do an in dash install like Bob 98 SR5 did to his 3rd gen 4Runner.

I accept Paypal, and I can ship this.
Shipping would probably be around $5.
I would like to get $50 for this.

Here are a few pics.

http://www.pnw4runners.com/runs/41203/19.jpg







Here is what the stock base looked like before the stereo shop did surgery on it.
http://pnw4runners.com/tando/mod15d.jpg

 

pm sent

 

Within the first hour :bigclap:

 

No fair!!! Regie 00, you must be more patient next time.

 

Sorry but i was patient. I have been looking for one of these for a while, looking for a good deal that was not taken yet.

Besides i waited for a half hour before i offered money.

Tell me an ebay "buy it now" for that item/price would have lasted even that long.

Fair warning: i am still looking for one for my truck.

Have a good weekend.

Reggie

 

Let the hunt begin.

 

if you find 2 give a yell, i'll do the same.

Good luck.

 

I can clone mine, we have the technoligy