Hi guys!

Doing some engine maintenance and dress up this spring so I have been collecting parts. With a new valve cover being one of the additions, I wanted to order new bolts. I have had no luck through Toyota (surprisingly) finding a part number for these. Are there generic ones I can get that will work (properly sized of course) or can anyone direct me to a part number? Engine is a 1995 3RZ. Thanks!

 

I am not very familiar with the 3RZ, but here is what I found.

Is this the bolt you are looking for?





I just searched Toyota Parts Overstock and according to their database, the part has been discontinued.

https://parts.lakelandtoyota.com/p/T...1513J0628.html


However, Toyota Parts Deal shows them as still being available.

https://www.toyotapartsdeal.com/oem/...513-j0628.html

 

Yes that it is it and thank you for looking that up. I checked my local dealerships part site and it was not listed. Also tried to contact the parts department and they never got back to me after over a week. Do I have any aftermarket options? I am having trouble doing so.

 

Well, unless it is a special bolt, you can probably run down to your hardware store and match up your old bolts to one of the metric sized bolts. My local ACE Hardware has a pretty good metric selection.

I don't know the size of the bolt off hand, or otherwise I would post it up.

 

Will I need to get one with the crush type o-rings on them?