When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
picture heavy I've done quite a few mods to my truck. about 8 months ago my bf and I made a "flat" bed for my truck
cleaning the frame up after removing the old bed. there is only 6 bolts that hold the bed down, fuel filler neck (3 screws) and the tail lights - very easy to remove setting up the main frame of the bed bobbed the end of the bed setting up the sides making sure the lights fit the tabs my bf designed and cut with a water jet the finished product
did a solid axle swap a year ago sorry for late pictures just totally neglected my yotatech account
Unbolt IFS Torch off brackets grind smooth plate for engine mount provided Sorry no photos of rebuilding front axle, just followed Lowrangeoffroad's youtube tutorials loosly bolt everything in set up steering check ride height and shackle angle
Oct 14, 2015 | 08:12 PM
