Who is good at designing stickers?
#82
Contributing Member
Thread Starter
Join Date: Nov 2003
Location: Escondido, CA
Posts: 1,082
Likes: 0
Received 0 Likes
on
0 Posts
I was looking at a few places online and they were asking a few hundred bucks for 250 stickers (for 3 or 4 colors) and that was the min. order..I am not shure we would have that many people interested.
#83
Contributing Member
Join Date: Jan 2003
Location: Houston, TX
Posts: 5,377
Likes: 0
Received 0 Likes
on
0 Posts
That's kind of steap. that's over $1 per sticker. maybe I'll got buy some colored sharpies and some contruction paper and ham one up. but with the tinted windows I'd have to laminate it so I can tape it on outside.
#85
Contributing Member
Join Date: Jan 2003
Location: Houston, TX
Posts: 5,377
Likes: 0
Received 0 Likes
on
0 Posts
nice big pic. I'm researching some places to see what I can find since I have so much time on my hands. I'll post if I find something earthshatteringly cheap. at this point I could care less about being die cut or whatever. if I got 100 for about 25 bucks we could all have about 6 or so each and just replace them when the previous one falls off.
#86
Contributing Member
Thread Starter
Join Date: Nov 2003
Location: Escondido, CA
Posts: 1,082
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by keisur
nice big pic. I'm researching some places to see what I can find since I have so much time on my hands. I'll post if I find something earthshatteringly cheap. at this point I could care less about being die cut or whatever. if I got 100 for about 25 bucks we could all have about 6 or so each and just replace them when the previous one falls off.
#89
Contributing Member
Join Date: Jan 2003
Location: Houston, TX
Posts: 5,377
Likes: 0
Received 0 Likes
on
0 Posts
even smaller would be cool with me. I don't really like stickers on my runner but I had to put a small arb one to signify my lockers and a small windsurfing one which blends into the tint so it doesn't look bad.
one of these days I'll get "Vertically Challenged" in big old english letters across my rear glass. I'll be cool then.
one of these days I'll get "Vertically Challenged" in big old english letters across my rear glass. I'll be cool then.
#90
Contributing Member
Thread Starter
Join Date: Nov 2003
Location: Escondido, CA
Posts: 1,082
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, I am not into plastering my cars/trucks with stickers. I have 2 right now. My USAF Enlisted Wings badge and a POW/MIA sticker. smaller wouldbe cool with me as well.
oh, I think it would take a LOT more then a sticker to make you seem cool.
oh, I think it would take a LOT more then a sticker to make you seem cool.
Originally Posted by keisur
even smaller would be cool with me. I don't really like stickers on my runner but I had to put a small arb one to signify my lockers and a small windsurfing one which blends into the tint so it doesn't look bad.
one of these days I'll get "Vertically Challenged" in big old english letters across my rear glass. I'll be cool then.
one of these days I'll get "Vertically Challenged" in big old english letters across my rear glass. I'll be cool then.
#91
Contributing Member
Join Date: Jan 2003
Location: Houston, TX
Posts: 5,377
Likes: 0
Received 0 Likes
on
0 Posts
Ok then, a sticker and a cold beer and a furry pink derby hat with a feather sticking out of it.
I am incahoots with a dude here in town that my wife deals with at her job (Exxon Chemical) who is checking to see what kind of deal he can cut on the stickers. I'll keep you's guys posted.
I am incahoots with a dude here in town that my wife deals with at her job (Exxon Chemical) who is checking to see what kind of deal he can cut on the stickers. I'll keep you's guys posted.
#92
Contributing Member
Join Date: Jan 2003
Location: Houston, TX
Posts: 5,377
Likes: 0
Received 0 Likes
on
0 Posts
OK here's the deal people. The guy I talked to can get 20-30 or so stickers ripped off for about $3.25 each plus tax. He can turn them around for me in about 2 days.
Now, what I would need is a vector art format of the image (.eps or something). he quoted me for a 2.5"x(length depending the 2.5" to hold aspect ratio) and I am just looking at basic rectangle with clear background. you could cut it out if you so desired but it is just way cheaper not to get it die cut around the lettering and just cut the outside away ourselves.
let me know and send me a vector format image and I'll get the ball rolling for distribution at Barnwell. I would pick up the cost as a kind gesture to the org from me but since I don't have a job I can't. so let's say 30*3.25= $97.50 + Tax. I guess I could make up the difference and just have people buy them from me if they want them, but I'd rather have a head count of how many want them in case we need more than 30 or if I'll get stuck with a bunch of stickers.
J.
keisur@tx4roc.com
Now, what I would need is a vector art format of the image (.eps or something). he quoted me for a 2.5"x(length depending the 2.5" to hold aspect ratio) and I am just looking at basic rectangle with clear background. you could cut it out if you so desired but it is just way cheaper not to get it die cut around the lettering and just cut the outside away ourselves.
let me know and send me a vector format image and I'll get the ball rolling for distribution at Barnwell. I would pick up the cost as a kind gesture to the org from me but since I don't have a job I can't. so let's say 30*3.25= $97.50 + Tax. I guess I could make up the difference and just have people buy them from me if they want them, but I'd rather have a head count of how many want them in case we need more than 30 or if I'll get stuck with a bunch of stickers.
J.
keisur@tx4roc.com
Last edited by keisur; 06-09-2004 at 07:36 AM.
#93
Contributing Member
Thread Starter
Join Date: Nov 2003
Location: Escondido, CA
Posts: 1,082
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by keisur
OK here's the deal people. The guy I talked to can get 20-30 or so stickers ripped off for about $3.25 each plus tax. He can turn them around for me in about 2 days.
Now, what I would need is a vector art format of the image (.eps or something). he quoted me for a 2.5"x(length depending the 2.5" to hold aspect ratio) and I am just looking at basic rectangle with clear background. you could cut it out if you so desired but it is just way cheaper not to get it die cut around the lettering and just cut the outside away ourselves.
let me know and send me a vector format image and I'll get the ball rolling for distribution at Barnwell. I would pick up the cost as a kind gesture to the org from me but since I don't have a job I can't. so let's say 30*3.25= $97.50 + Tax. I guess I could make up the difference and just have people buy them from me if they want them, but I'd rather have a head count of how many want them in case we need more than 30 or if I'll get stuck with a bunch of stickers.
J.
keisur@tx4roc.com
Now, what I would need is a vector art format of the image (.eps or something). he quoted me for a 2.5"x(length depending the 2.5" to hold aspect ratio) and I am just looking at basic rectangle with clear background. you could cut it out if you so desired but it is just way cheaper not to get it die cut around the lettering and just cut the outside away ourselves.
let me know and send me a vector format image and I'll get the ball rolling for distribution at Barnwell. I would pick up the cost as a kind gesture to the org from me but since I don't have a job I can't. so let's say 30*3.25= $97.50 + Tax. I guess I could make up the difference and just have people buy them from me if they want them, but I'd rather have a head count of how many want them in case we need more than 30 or if I'll get stuck with a bunch of stickers.
J.
keisur@tx4roc.com
Here is another problem boss. I think that Scofco only made the one image..and I have no idea what a vector file is
So, someone who knows how to vector a file would have to redraw it.
I emailed that guy who did the Yotatech stickers ( or decals if you want to be a snob about it ) I am just waiting for his responce.
but it sounds like you are on the right track.
BTW FWIW, I think the pink hat might make you look sort of hot after a few cold beers ( Hell, its all I got after you got me cut off Watchout on the trails
~Todd
#94
Contributing Member
Join Date: Jan 2003
Location: Houston, TX
Posts: 5,377
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Herkengineer
J.
Here is another problem boss. I think that Scofco only made the one image..and I have no idea what a vector file is
So, someone who knows how to vector a file would have to redraw it.
I emailed that guy who did the Yotatech stickers ( or decals if you want to be a snob about it ) I am just waiting for his responce.
but it sounds like you are on the right track.
BTW FWIW, I think the pink hat might make you look sort of hot after a few cold beers ( Hell, its all I got after you got me cut off Watchout on the trails
~Todd
Here is another problem boss. I think that Scofco only made the one image..and I have no idea what a vector file is
So, someone who knows how to vector a file would have to redraw it.
I emailed that guy who did the Yotatech stickers ( or decals if you want to be a snob about it ) I am just waiting for his responce.
but it sounds like you are on the right track.
BTW FWIW, I think the pink hat might make you look sort of hot after a few cold beers ( Hell, its all I got after you got me cut off Watchout on the trails
~Todd
I don't call it a "decal." To me, a decal you have to soak in water and slide on and then squeegie the bubbles out. Stickers come pre-adhesived and are peal and stick. Those dingus snotty decal huggers!
I'll do some more investigating on the vector art stuff and see what I can drum up. I wish somebody who knows about graphic formats would chime in.
Last edited by keisur; 06-09-2004 at 05:25 PM.
#95
Contributing Member
Thread Starter
Join Date: Nov 2003
Location: Escondido, CA
Posts: 1,082
Likes: 0
Received 0 Likes
on
0 Posts
Here is the email i got back from the guy who does the yotatech stickers
Hello Allen;
Thanks for your inquiry! We'd love to make those 4ROC decals. If you could
order 50-100 all at once, we could do them for $3.00 each. Let me know what
you would like to do.
Thanks;
Curtis Nichols
Nichols Design
253.833.6688
Curtis Nichols [nicholsdesign@hotmail.com]
Hello Allen;
Thanks for your inquiry! We'd love to make those 4ROC decals. If you could
order 50-100 all at once, we could do them for $3.00 each. Let me know what
you would like to do.
Thanks;
Curtis Nichols
Nichols Design
253.833.6688
Curtis Nichols [nicholsdesign@hotmail.com]
#97
Contributing Member
Thread Starter
Join Date: Nov 2003
Location: Escondido, CA
Posts: 1,082
Likes: 0
Received 0 Likes
on
0 Posts
I E mailed him again and asked that very question. I am sure the answer will come on Thursday.
Todd
Todd
Last edited by Herkengineer; 06-09-2004 at 05:38 PM.
#98
Contributing Member
Join Date: Jan 2003
Location: Houston, TX
Posts: 5,377
Likes: 0
Received 0 Likes
on
0 Posts
since I have time I'll try and work on a vector version tomorrow so we'll have it. keep in mind my guy can get a 2day turn around and no setup fee so if it comes down to it...
#99
Contributing Member
Thread Starter
Join Date: Nov 2003
Location: Escondido, CA
Posts: 1,082
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by keisur
since I have time I'll try and work on a vector version tomorrow so we'll have it. keep in mind my guy can get a 2day turn around and no setup fee so if it comes down to it...
BTW, I received my sway disco's, my Diff Drop and my SAWs today ..just waiting on my OME rear springs/shocks
#100
Contributing Member
Join Date: Jan 2003
Location: Houston, TX
Posts: 5,377
Likes: 0
Received 0 Likes
on
0 Posts
no, what I was thinking was that if your guy can get them made with the existing image lets do that. plus he's cheaper at $3 each. don't worry about stepping on toes, I just want a sticker, not a decal.
I have my lars discos I got from my buddy Joey a couple months ago that I'll be putting on tomorrow. He said he didn't really need them and basically handed them to me. but being a gent I gave him some cash for them because I didn't feel right just taking them. Make sure you take pics of the SAWs install and stuff. it'll bring back memories since I did mine 2 years ago.
I have my lars discos I got from my buddy Joey a couple months ago that I'll be putting on tomorrow. He said he didn't really need them and basically handed them to me. but being a gent I gave him some cash for them because I didn't feel right just taking them. Make sure you take pics of the SAWs install and stuff. it'll bring back memories since I did mine 2 years ago.