Flex shots of 3rd Gen 4Runner SPRING OVER SAS
07-31-2005, 09:13 AM
#64
Contributing Member
Join Date: Oct 2002
Location: NM
Posts: 1,843
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by cubuff4runner
..........The only way a better angle can be achieved is by cutting the frame and moving the bar back, but then a winch won't fit because it will be sitting on the radiator. ..........
........My overall goal when building the front bar was to keep the factory look as much as possible, but have the best angle, and protection possible while fitting a winch......
........My overall goal when building the front bar was to keep the factory look as much as possible, but have the best angle, and protection possible while fitting a winch......
If you want to maxamize approach angle, here is some inspiration for ya, with out cutting the frame rails or moving any radiator stuff:
More pics at the following site:
http://www.hunt4steve.com/or/99_4run...protection.htm
More pics on my site
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
FS[PacSouthWest]: 2- 8"3rd members:4.88 ratchet lockers,new setup kit, rear axle rebuild kit,diff armor
jerusry
Axles - Suspensions - Tires - Wheels
1
10-19-2015 05:28 PM
