3rd Gen Swing out carrier --- ideas?
#2
I had a guy use a spindle mount style hinge that I got from Rockstomper when he converted my Marlin bumper to swing out.
I have since found that a spindle mount is not the way to go especially if you are going to have both a spare tire and gas can. There are several reported cases of failure:
http://pirate4x4.com/forum/showthread.php?t=726027
http://www.jeepsunlimited.com/forums...hreadid=538906
turns out the spindle can become fatiqued. one guy lost a his tire on the freeway
When I get the chance I will be redoing my swing out using a double shear design similar to what EMS off road offers
http://emsoffroad.com/shop/index.php...8daf4adbd2f1e6
Iron Pig off Road has got some great kits for the DIY:
http://www.ironpigoffroad.com/fab/diy.shtml
as far as your idea coming through the stock bumper, that is kind of a cool idea, I would make sure the sub frame is substantial and tied to the frame.
I have since found that a spindle mount is not the way to go especially if you are going to have both a spare tire and gas can. There are several reported cases of failure:
http://pirate4x4.com/forum/showthread.php?t=726027
http://www.jeepsunlimited.com/forums...hreadid=538906
turns out the spindle can become fatiqued. one guy lost a his tire on the freeway
When I get the chance I will be redoing my swing out using a double shear design similar to what EMS off road offers
http://emsoffroad.com/shop/index.php...8daf4adbd2f1e6
Iron Pig off Road has got some great kits for the DIY:
http://www.ironpigoffroad.com/fab/diy.shtml
as far as your idea coming through the stock bumper, that is kind of a cool idea, I would make sure the sub frame is substantial and tied to the frame.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
FS[PacSouthWest]: 2- 8"3rd members:4.88 ratchet lockers,new setup kit, rear axle rebuild kit,diff armor
jerusry
Axles - Suspensions - Tires - Wheels
1
10-19-2015 05:28 PM