Info:?
#27
Registered User
Join Date: Aug 2003
Location: Raleigh, NC
Posts: 825
Likes: 0
Received 0 Likes
on
0 Posts
Location:
Raleigh, NC
Contact:
jason-ece@engineer.com
Rig:
1995 Toyota Landcruiser
4.5L I-6
Modifications:
Mechanical:
6" Custom Lift w/ Old Man Emu Coils and Shocks
Adjustable Panhard bars, F/R
Castor corrected custom Front Control Arms
Longer Rear Control Arms
Safari Snorkel
Longfields
reground cams
TRD Supercharger
smaller pulley on S/C
Front and Rear ARB air lockers
Dual air tanks in rear
air chuck in front of ARB bar
Electrical:
Dual Optimas relocated to rear cargo area
Distribution blocks in engine bay, water sealed
colder plugs
0 gauge wire throughout for winch, batteries, and engine
Garmin III GPS
IPF rear light
FET front lights
Warn M15000 winch
4' Firestik on ARB
Radioshack CB (bling)
Alpine 7930
Clarion Pro-Audio 920 EQ
Exterior:
ARB front bar
Slee-Offroad rear bar w/ tire carrier
6.5 ton shackles f/r
Custom sliders
Custom T-case skid plate
CUSTOM TREE MOD
Wheels/Tires:
16X10 Rockcrawler's
35X12.50 MT/R's
Red Ring Trailready beadlocks
38.5" SX's
That's it.... email me for pics.
Jason
Raleigh, NC
Contact:
jason-ece@engineer.com
Rig:
1995 Toyota Landcruiser
4.5L I-6
Modifications:
Mechanical:
6" Custom Lift w/ Old Man Emu Coils and Shocks
Adjustable Panhard bars, F/R
Castor corrected custom Front Control Arms
Longer Rear Control Arms
Safari Snorkel
Longfields
reground cams
TRD Supercharger
smaller pulley on S/C
Front and Rear ARB air lockers
Dual air tanks in rear
air chuck in front of ARB bar
Electrical:
Dual Optimas relocated to rear cargo area
Distribution blocks in engine bay, water sealed
colder plugs
0 gauge wire throughout for winch, batteries, and engine
Garmin III GPS
IPF rear light
FET front lights
Warn M15000 winch
4' Firestik on ARB
Radioshack CB (bling)
Alpine 7930
Clarion Pro-Audio 920 EQ
Exterior:
ARB front bar
Slee-Offroad rear bar w/ tire carrier
6.5 ton shackles f/r
Custom sliders
Custom T-case skid plate
CUSTOM TREE MOD
Wheels/Tires:
16X10 Rockcrawler's
35X12.50 MT/R's
Red Ring Trailready beadlocks
38.5" SX's
That's it.... email me for pics.
Jason
#28
Contributing Member
Join Date: Aug 2002
Location: High Point NC
Posts: 2,063
Likes: 0
Received 0 Likes
on
0 Posts
Sweet finally we got Jason to commit, now all we need to here from is Sam, come on bud don't get left behind. This is awsome, I have to give a big thanks to Austin for getting all this under way and and actually acomplishing it. Now we just all need to get our rigs ready for Spring so we can have a 4ROC meet again, this time EVERYONE comes, no cop outs,(cough cough Austin, girls, cough cough) . Just kid'n man, I really want to meet everyone and get some good group times in this wheel'n season. If anyone knows of or hears of an 85' Runner for sale let me know b/c that is my mission, to have an 85's ready to roll for the spring/early summer time.
#29
Registered User
Join Date: Aug 2003
Location: Raleigh, NC
Posts: 825
Likes: 0
Received 0 Likes
on
0 Posts
Sweet finally we got Jason to commit
J
#30
Contributing Member
Thread Starter
Join Date: Jun 2002
Location: Brooklyn, NY
Posts: 4,868
Likes: 0
Received 0 Likes
on
0 Posts
Your welcome!
Its something I enjoy and I think its kinda cool that I am sort of a founder (I think thats safe to say) of any group much less a car/truck club! Now all I have to do is get us some decals made up. I look forward to actually meeting everyone who couldn't make it to the first meet coughstumpcough I'll work on the females dept too... maybe if I get some flags made I could get some good backgrounds worth looking at in the downloads section! Anyway... i'm off to bed. I'll get your page up tomorrow Jason!
edit: Almost forgot!! We also have another member to get info from. Chris! Wheres the info on that 99 of yours!!?? I know you just took the 30day tag off but you already are getting that project going! I'll get the pics up when i get em.
Its something I enjoy and I think its kinda cool that I am sort of a founder (I think thats safe to say) of any group much less a car/truck club! Now all I have to do is get us some decals made up. I look forward to actually meeting everyone who couldn't make it to the first meet coughstumpcough I'll work on the females dept too... maybe if I get some flags made I could get some good backgrounds worth looking at in the downloads section! Anyway... i'm off to bed. I'll get your page up tomorrow Jason!
edit: Almost forgot!! We also have another member to get info from. Chris! Wheres the info on that 99 of yours!!?? I know you just took the 30day tag off but you already are getting that project going! I'll get the pics up when i get em.
Last edited by turboale; 12-08-2003 at 07:44 PM.
#31
Registered User
Join Date: Aug 2003
Location: Raleigh, NC
Posts: 825
Likes: 0
Received 0 Likes
on
0 Posts
Austin-
Nice job w/ the web site. Thanks for putting so much time into our club's site. I'm sure I speak for us all when we say:
" Great job! Thanks a bunch! "
Jason
Nice job w/ the web site. Thanks for putting so much time into our club's site. I'm sure I speak for us all when we say:
" Great job! Thanks a bunch! "
Jason
#32
Contributing Member
Join Date: Aug 2002
Location: High Point NC
Posts: 2,063
Likes: 0
Received 0 Likes
on
0 Posts
Yeah I almost forgot about Chris, I still wish he had made it out to Uwharrie with me that first time, but he couldn't help it the whole family got sick on him all at once, so he had to do the daddy thing. We need him and Andrew(Minidisc) if anyone can ever pin him down online. He's prolly just busy as hell like Jason and the rest of us.
Thanks for the lending of your eyes in my search Jason, there are tons of nice 85's on Pirate 4x4, I'm so tempted to find one on there and just have it shipped from where ever in Cali. and deal with w/e problems may happen. 4-5K for a fully built 85' is hard to pass up.
Thanks for the lending of your eyes in my search Jason, there are tons of nice 85's on Pirate 4x4, I'm so tempted to find one on there and just have it shipped from where ever in Cali. and deal with w/e problems may happen. 4-5K for a fully built 85' is hard to pass up.
#33
Contributing Member
Thread Starter
Join Date: Jun 2002
Location: Brooklyn, NY
Posts: 4,868
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, good luck on the 85 search. Did you see that fully built 2nd gen in the classifieds?? He was going to sell it for 6something I think is what he got it down to. That was a DEAL! Anyway... good luck
#34
Contributing Member
Thread Starter
Join Date: Jun 2002
Location: Brooklyn, NY
Posts: 4,868
Likes: 0
Received 0 Likes
on
0 Posts
Alrightey, I got the CD from Dave and Jayson I got your image made up, now all i have to do is make your site. Then I'll put the pictures up from the second run. I'm sorry ive been kinda slow but i'm working on a small video project for a non-profit plus doggie training plus I'm starting a tech section and just finished the first write-up! Stay tuned! I also met a guy with a sweet 2nd gen last night driving. He pulled into a gas station so I pulled in with him. He seemed really nice and hopefully chime in here sometime. I gave him my # and the website so hopefully he will join! He was excited to finally find someone that was willing to "play trucks" with him up here, hes only been in aville for a year or so. 4Roc is growing!! Dammit I need to get some decals made up...
Also, thanks for the thanks J!
Also, thanks for the thanks J!
Last edited by turboale; 12-12-2003 at 06:03 AM.
#35
Registered User
Join Date: Jul 2003
Location: Concord, NC
Posts: 500
Likes: 0
Received 0 Likes
on
0 Posts
turboale, Here is a link to photos of our second Uwharrie meet. minidisc posted this link in a previous thread.
http://kingant.net/cgi-bin/photo/ind...ad,%20Uwharrie
http://kingant.net/cgi-bin/photo/ind...ad,%20Uwharrie
#36
Contributing Member
Thread Starter
Join Date: Jun 2002
Location: Brooklyn, NY
Posts: 4,868
Likes: 0
Received 0 Likes
on
0 Posts
Oh cool... there are more pics there than on the cd too. I'm capturing 4 hours of DV right now so, I'm not going to be able to get to it til atleast tonight. Thanks Dave
#38
Contributing Member
Join Date: Aug 2002
Location: High Point NC
Posts: 2,063
Likes: 0
Received 0 Likes
on
0 Posts
January, I wasn't expecting any kind of meet until April when the parks opened back up. I guess we could meet for a Boone trip, up in the area that Chris and Austin went, "West Bowl" correct me if I'm wrong on that. That would be awsome, I sware by then the axels will be replaced aa will the clutch and the all range locker mod will be ready to roll. Maybe .
#39
Registered User
Join Date: Feb 2003
Location: James Island/ChuckTown, SC
Posts: 698
Likes: 0
Received 0 Likes
on
0 Posts
Location:Hickory/Boone, NC
Contact:_ AIM: ssbogger77
email: sam@40hz.us
Website: http://community.webshots.com/user/ssbogger
My Rig: '99 4runner Highlander 3.4L 5-spd
Year, Model, engine ect.
Modifications:
Exterior-Custom gutter guard grill --- Fake HID's --- Clear lenses --- --- --- 3'' Revtek lift with Diff drop --- --- De-badged-- tree scratches-- tint
Electronics-A pair of Kicker L7 12's w/ 750W and a Sony MEX-5Di- Alpine amp to factory speakers --Fog light override
Mechanical-TRD S/C w/ future fuel mods--Deckplate mod (closed) --- ISR mod (removed)
Wheels/Tires:
BFG AT/KO 285's on stock wheels
You can get pics off my website. I really dont care which ones.
Thanks for getting the site together. It looks GREAT!
Contact:_ AIM: ssbogger77
email: sam@40hz.us
Website: http://community.webshots.com/user/ssbogger
My Rig: '99 4runner Highlander 3.4L 5-spd
Year, Model, engine ect.
Modifications:
Exterior-Custom gutter guard grill --- Fake HID's --- Clear lenses --- --- --- 3'' Revtek lift with Diff drop --- --- De-badged-- tree scratches-- tint
Electronics-A pair of Kicker L7 12's w/ 750W and a Sony MEX-5Di- Alpine amp to factory speakers --Fog light override
Mechanical-TRD S/C w/ future fuel mods--Deckplate mod (closed) --- ISR mod (removed)
Wheels/Tires:
BFG AT/KO 285's on stock wheels
You can get pics off my website. I really dont care which ones.
Thanks for getting the site together. It looks GREAT!
#40
Contributing Member
my info
87 4runner " delux" 230,000 + and still going strong!
mods: lets see engine first: lc engineering header, lc free flow cat. 2" aluminized exhaust.
lc engineering pro street head (44mm stainless valves bla bla blaa)
k&n air filter custom internal snorkel ( comes out in the cowel area)
drive train: 4.88 gears with lock right in front
warn premium hubs
stock 5 speed tranny.
(looking to upgrade brakes soon)
4" pro comp lift in front with rancho torsion bars
3" downey rear springs with rancho add a leafs
exterior: a major work in progress!
just finished the front half restoration (rust is NOT my friend!)
the rear half will take shape next month
smitty built nerfs (to be replaced soon after I finish the front bumper! grey soft top for summer time cruisin!
custom rear bumper with tire carier. Yep, gonna replace that in the future with a much better version. ( home made of course)
Wheels and tires;
33x12.50 bridgestone duelers on 10" aluminum wheels
and a spare set of 33x12.5 bfgs' on 8.5" aluminum wheels.
currently I am working on a front bumper that will house all recovery equipment and have a reciever for a reciever mounted winch. I have most of it drawn up in a cad file and have already made a woodwn mock up of it, so it shouldnt be long (a month or two before it is complete.
I will post pic s as soon as I can.
Thanks for the welcome to the site and I hope to see everyone at the next 4roc nc meet.
mods: lets see engine first: lc engineering header, lc free flow cat. 2" aluminized exhaust.
lc engineering pro street head (44mm stainless valves bla bla blaa)
k&n air filter custom internal snorkel ( comes out in the cowel area)
drive train: 4.88 gears with lock right in front
warn premium hubs
stock 5 speed tranny.
(looking to upgrade brakes soon)
4" pro comp lift in front with rancho torsion bars
3" downey rear springs with rancho add a leafs
exterior: a major work in progress!
just finished the front half restoration (rust is NOT my friend!)
the rear half will take shape next month
smitty built nerfs (to be replaced soon after I finish the front bumper! grey soft top for summer time cruisin!
custom rear bumper with tire carier. Yep, gonna replace that in the future with a much better version. ( home made of course)
Wheels and tires;
33x12.50 bridgestone duelers on 10" aluminum wheels
and a spare set of 33x12.5 bfgs' on 8.5" aluminum wheels.
currently I am working on a front bumper that will house all recovery equipment and have a reciever for a reciever mounted winch. I have most of it drawn up in a cad file and have already made a woodwn mock up of it, so it shouldnt be long (a month or two before it is complete.
I will post pic s as soon as I can.
Thanks for the welcome to the site and I hope to see everyone at the next 4roc nc meet.