Wrecked 3.4 Taco Build ?s
May 2, 2015 | 04:06 PM
#1
Thread Starter
Registered User
Joined: Apr 2015
Posts: 4
Likes: 0
Wrecked 3.4 Taco Build ?s
I got ahold of a 2002 3.4 V6 Crew Cab 4x4 truck that had been wrecked in the front end. The frame is bent, but by chance I have a 99 Tacoma Xtra Cab frame. I'm going to swap the 02 cab, bed, and motor/trans to my 99 frame. Wondering if you all had any tips or tricks for making this swap easier....
May 3, 2015 | 12:15 AM
#3
Registered User
iTrader: (1)
Joined: Apr 2009
Posts: 13,381
Likes: 100
From: I live in New Tripoli Pa out in the woods
Take your time . Get help when you need it.
Get out the tape measure and measure every thing.
Much easier to do any fabrication before the cab and body are sitting on the 99 frame.
Might be a good time to reinforce the 99 frame at the places prone to rust. unless your in the desert !!
Know your more then likely going to be moving the cab and body mounts I can`t say for sure never having been under a 4 door truck.
Get out the tape measure and measure every thing.
Much easier to do any fabrication before the cab and body are sitting on the 99 frame.
Might be a good time to reinforce the 99 frame at the places prone to rust. unless your in the desert !!
Know your more then likely going to be moving the cab and body mounts I can`t say for sure never having been under a 4 door truck.
Thread
Thread Starter
Forum
Replies
Last Post
Crgrey42
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
1
Aug 10, 2015 04:23 AM
ripp96
95.5-2004 Tacomas & 96-2002 4Runners
6
Jul 31, 2015 11:14 AM
