Suspention for an 1985 Pick-Up on 33's
Dec 23, 2019 | 06:18 PM
#1
Thread Starter
Registered User
Joined: Dec 2019
Posts: 2
Likes: 0
Suspention for an 1985 Pick-Up on 33's
Hello, I'm new here so I hope this is the right forum.
My 85 was lifted and had worn out 33's when I got it. Naturally, I replaced them with BFG 33's, so I need enough lift to clear them flexed out. From what I have read online the OME kit will only clear 31's or 32's on a solid axle, and I would like to avoid a body lift and trimming if at all possible.
This truck needs to have some pavement manners because it is my daily driver. I'm not after anything crazy, but it's current setup rides like a brick...
My 85 was lifted and had worn out 33's when I got it. Naturally, I replaced them with BFG 33's, so I need enough lift to clear them flexed out. From what I have read online the OME kit will only clear 31's or 32's on a solid axle, and I would like to avoid a body lift and trimming if at all possible.
This truck needs to have some pavement manners because it is my daily driver. I'm not after anything crazy, but it's current setup rides like a brick...
Dec 24, 2019 | 07:17 PM
#2
Thread Starter
Registered User
Joined: Dec 2019
Posts: 2
Likes: 0
According to this thread (#12), you can clear a 33x10.5 with minimal lift. I would love input if anybody has some!
https://www.toyota-4runner.org/class...s-no-lift.html
https://www.toyota-4runner.org/class...s-no-lift.html
Thread
Thread Starter
Forum
Replies
Last Post
_94yotapickup_
Newbie Tech Section
8
Jul 16, 2015 08:54 AM
