I have a 00' sr5 4runner 4x4. I've been reading and searching alot about lifts and everything, but I'm still very new to this. I do alot of highway driving and very little offroading, its basically for looks. After reading your reviews I'm pretty sure I'm going to go with a daystar front & rear suspension lift kit, but I'm not sure about what height. I was wondering if there were any advantages or disadvantages between the 1-1/2" & 2-1/2" besides the height & tire clearance difference. And I'll have it installed at a shop but would I need anything else, part wise? Thanks for the help.

James

 

Keep on searching and researching. You can learn and know exactly what you want if you just take the time.

 

This may help.......
https://www.yotatech.com/forums/show...24&postcount=1

 

also:

https://www.yotatech.com/forums/f31/suspension-lift-faq-44741/

https://www.yotatech.com/forums/f2/new-suspension-setup-trd-front-lift-3rd-gen-4runner-41848/

and if you want a Daystar Lift, buy a diff drop from sschaefer3 and he'll sell you the Daystar Lift at cost. PM him for details.