One of the few drawbacks to the T100 is the "composite" skidplate that it comes with. This ends up functioning more as a splash guard than anything else really. After taking some measurements I cadded a fab drawing for a replacement. The details can be found on my skidplate modification page.
At the bottom of the webpage is a link to a hi-res jpeg image of the fab drawing. The fab drawing was corrected after installing my original revealed some mistakes. This revised design has worked for several guys over on 4x4wire and I figured I should share the love here. Hope a few more can make use of this.

(Note to mods: If you'd like to move this to fab shop that's cool, it may help some others. As it was specifically T100 to start with I figured I'd start here.)

 

I tried to follow the link provided but had no luck. Did anyone here save this info or have a template available? thanks.

 

Try sending Honger a pm message. This is a really old thread.

 

i pm'ed him. he sent me the diagram. i found someone to make it for me. I also talked with the guy making my plate, he is interested in doing a push/ winch bumper for me.
thanks Honger!