Sequoia lift ??'s
Apr 8, 2005 | 11:54 AM
#1
Thread Starter
Registered User
Joined: Apr 2005
Posts: 7
Likes: 0
Sequoia lift ??'s
I am getting the Revtek lift for my 03 Sequoia...Revtek told me I need wheels with 4.25" back spacing or less.....is this true? Claim the tire will hit the A arm. There are not a whole of wheels out there with 4.25" or less back spacing...Help
Thanks
Matt
Thanks
Matt
Apr 17, 2005 | 06:11 PM
#2
Registered User
Joined: Sep 2004
Posts: 108
Likes: 7
From: TX
I had to go with Weld Racing to find a backspacing that would work on my '01 Limited. The max on the (Weld) EVO Velociti 6 was -4.62" it clears and has about 1/16" to spare! Revtek is right! Also, I went with 16x8's offset is about 1" difference to the outside... really helps the handling. Hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post
1uzRunner
84-85 Trucks & 4Runners (Build-Up Section)
63
Nov 10, 2018 03:58 PM
FS[PacNorWest]: 1993 4 Runner, V6, 4wd, Auto,
AkitaDog
Vehicles - Trailers (Complete)
0
Sep 3, 2015 09:01 PM
