Help! '02 Sequoia alternator plug
#1
Help! '02 Sequoia alternator plug
When changing my alternator the plug in the back broke. The plastic was cracked and just crumbled leaving me with just the metal pins and wires. i'm having a real problem finding the plug. Nobody seems to have it. I went to the salvage yard and this plug had already been cut off on all the . So apparently this is a somewhat common problem for many.
i need help finding a plug but another worry is which wire goes in what position on the plug. I can't find anything anywhere.
The color of my wires are: 1 - black will small red stripe. 2 - white with small red stripe. 3 - yellow.
Any help is appreciated.
Thanks!
i need help finding a plug but another worry is which wire goes in what position on the plug. I can't find anything anywhere.
The color of my wires are: 1 - black will small red stripe. 2 - white with small red stripe. 3 - yellow.
Any help is appreciated.
Thanks!
The following users liked this post:
Chayito27 (01-27-2024)
The following users liked this post:
Chayito27 (01-27-2024)
#3
This may help others
After much searching I finally came up with a solution to getting the wiring layout for the alternator plug. A pin out diagram was forwarded to mewhich when coupled with the schematic drawing which matched the wire color with the S, IG and L terminals. I have included pics of the pinout, schematic and another one that may be
Pinout
Schematic
helpful.
Pinout
Schematic
helpful.
Last edited by Nlcowand; 08-20-2016 at 01:00 PM.
#5
2001 Toyota sequía alternator
I have a 2001 Toyota sequoia and when my alternator went out I put a new one but the harness or plug broke and now I don’t know which color goes where and I can’t find a diagram or a picture to what color goes where please help I want to know if this is the diagram or not
Thread
Thread Starter
Forum
Replies
Last Post
John Hannar
Newbie Tech Section
1
02-15-2012 09:14 AM
smurff
General Electrical & Lighting Related Topics
14
10-26-2011 06:39 AM