toytec ome3 question
Jan 31, 2007 | 11:46 AM
#1
Thread Starter
Registered User
Joined: Sep 2004
Posts: 356
Likes: 0
toytec ome3 question
im thinking of going with the toytec ome lift and was wondering on your opinions on using stock struts/shocks with it. i have a 97sr5 and was thinking of using the stock dampers to limit droop to save my cv's up front and keep from having to use an extended brake line out back. i know you recommend changing struts when doing this 
but my reason is stated above, plus i want to save money anyway. this will mostly be onroad...about 85% of the time, with some decent offroading to go fishing and camping.
but my reason is stated above, plus i want to save money anyway. this will mostly be onroad...about 85% of the time, with some decent offroading to go fishing and camping.
Jan 31, 2007 | 11:51 AM
#2
Banned
Joined: Mar 2004
Posts: 0
Likes: 0
toytec is a spacer lift right?
If I were you, I would go with the Tundra/OME set up. Its much better. I am in the same boat as you, 85% on road. I love the ride, minus the stiff
I would go with the comfort shocks if I had to do it over again.
In addition to the lift you will need the following things:
Diff Drip
E-brake re-locater bracket
Things you might/will need:
Adjustable pan hard bar
Extended brake lines
extended bumpstops
limiting straps(depending on how big you go and what shocks you use)
there are more stuff but I cant remember off the top of my head and Class is about to end for me.
these can be purchased at:
www.sonoransteel.com
www.4crawler.com
www.toyotapartsales.com
www.northridgetoyota.com
www.wheelersoffroad.com
If I were you, I would go with the Tundra/OME set up. Its much better. I am in the same boat as you, 85% on road. I love the ride, minus the stiff
I would go with the comfort shocks if I had to do it over again. In addition to the lift you will need the following things:
Diff Drip
E-brake re-locater bracket
Things you might/will need:
Adjustable pan hard bar
Extended brake lines
extended bumpstops
limiting straps(depending on how big you go and what shocks you use)
there are more stuff but I cant remember off the top of my head and Class is about to end for me.
these can be purchased at:
www.sonoransteel.com
www.4crawler.com
www.toyotapartsales.com
www.northridgetoyota.com
www.wheelersoffroad.com
Last edited by rworegon; Aug 18, 2014 at 05:43 PM.
Jan 31, 2007 | 11:59 AM
#3
Banned - User requested
Joined: Feb 2003
Posts: 3,496
Likes: 0
From: earth
toytec is a spacer lift right?
Jan 31, 2007 | 12:00 PM
#4
Registered User
Joined: Mar 2005
Posts: 343
Likes: 0
From: long island, NY
this certain toytec lift uses OME 880's and 890's i have the same kit and im running tockico trekmasters, you wont need brakelines or a panhard bar either...my truck is fine and flexes great...if you plan on runnin 285's get a 1-2" body lift cuz them tires will rubb otherwise its a great kit and rides much better than stock!
Jan 31, 2007 | 01:57 PM
#6
Thread Starter
Registered User
Joined: Sep 2004
Posts: 356
Likes: 0
the ome3 like toyotaoffroad stated is 880s and 890s all around. ill be getting a diff drop along with the kit, and toytec said they'd cut me a deal since i missed the group buy ric organized. the panhard and brake relocator things will be from sonoran, but my concern is using stock shocks/struts. will it be ok to use them as limiting devices to help control excessive droop with the new suspension setup?
Thread
Thread Starter
Forum
Replies
Last Post
TJWilly
95.5-2004 Tacomas & 96-2002 4Runners
6
Jul 31, 2015 02:05 PM
4Runnin2000
95.5-2004 Tacomas & 96-2002 4Runners
0
Jul 29, 2015 06:09 PM
