Torque specs for exhaust header nuts?
Oct 30, 2002 | 06:57 PM
#4
Contributing Member
Joined: May 2002
Posts: 184
Likes: 0
From: Arlington, Texas
This is from the 2000 Toyota Shop Manual, I doubt that anything has changed.
Nuts that hold the exaust manifolds on the heads
40 Nm, 30 Ft.Lb.
Nuts that hold the crossover pipe to the exhaust manifolds
45Nm, 33Ft.Lb.
Nuts that hold the exhaust pipe to the crossover pipe
62 Nm, 46 Ft.Lb.
The next flange down the exhaust pipe
48 Nm, 35 Ft.Lb.
Let me know if you need more. I'll be out of touch until Sunday night.
Nuts that hold the exaust manifolds on the heads
40 Nm, 30 Ft.Lb.
Nuts that hold the crossover pipe to the exhaust manifolds
45Nm, 33Ft.Lb.
Nuts that hold the exhaust pipe to the crossover pipe
62 Nm, 46 Ft.Lb.
The next flange down the exhaust pipe
48 Nm, 35 Ft.Lb.
Let me know if you need more. I'll be out of touch until Sunday night.
Thread
Thread Starter
Forum
Replies
Last Post
